Manual

InstallationInstructions.

Installingthe Tubing

I. Measure 3/4" fi'om the end of each remaining, I_iece of tubing, (/muet end and inlet end) and mark with a pencil (Fig., l0). (Check

tot roundness, smoothness, cuts, nicks, fiat spots and shaq) edges.)

3/4"----_

9mm/

( (}

INCORRECT

Fig. 10

Z /VOTE:Waterflow isfromlefttoright.Waterinletisontheleft side andwater outletis ontherightside. Failuretofollow will resultin water

leakswhenfiltercanistersareremoved.

Inletfromsupplyvalve -'_"-_

................................._ ...................................]_,,_-.-..- Outlet

tofaucet

3 Push the tubing firefly into each fitting on the manifi)ld until the line is flush with the fitting collan (If the tubing is remoxed, re-cut

the end, measure, mark and re-insert). Tubing must be fidh inserted to axoid lea!<s (Fig. 11). (To remove tubing, depress and hold white

collet pull tubing out to remove.)

WhiteCollet tq ¢///////_ .._

{DO NOT REMOVE)----}__//

" 3-" I

insertionline._q:_l-_ 74 "'"_1

Inselttubing----t_i_l_]_

i i

Engagement --_l

3/4 3/8 tubng) I

Fig. 11

4 Pull out slightly on tubing to ensure a good seal.