GE Oil & Gas Technical Specifications 05/2013 Masoneilan* 80000 Series Three-Way Control Valves Combining and Diverting Service
| GE Oil & Gas
Table of Contents Features.....................................................................................................................3 CV and Flow Dir........................................................................................................8 Numbering System...............................................................................................4 Materials of Construction...................................................................................
Numbering System 1st — 2nd 8 Actuator Type 2nd 3rd 4th 8 0 3 8 Body Series — 87 Spring Diaphragm Air to Extend 1st Control Characteristics Plug Type 80 3. Top and Port Guided 88 Spring Diaphragm Air to Retract 8. Linear Ported n Butt Weld ∆ RT Joint Valve Sizes l Threaded m Socket Weld ASME Class 150 300 inches mm .75, 1, 1.5, 2 20, 25, 40, 50 l∆m l∆m l∆m 3 through 12 80 through 300 ∆ ∆ ∆ 600 1) .
General Data Body Type: 3-way Flow Direction: Flow to open (both ports) CV Ratio: 50:1 Materials: Carbon steel Stainless steel Chrome-molybdenum steel Others Bonnet Type: Packing Optional: Materials: Bolted Box: Bolted Extension Carbon steel Stainless steel Chrome-molybdenum steel Others Trim Type: 385 - combining 386 - diverting Flow Characteristics Linear Full capacity only Actuator Actuator Type: Spring diaphragm Direct, air to
Temperature Range/Seat Leakage Value Size (1) inch 0.75 to 12 Body Rating mm 20 to 300 Body & Bonnet Material ASME Class 150 to 600 (PN 10 to 100) Temperature Ranges (1) Standard Bonnet Min. Max. Carbon Steel -4°F (-20°C) Stainless Steel Extension Bonnet Min. Max.
Flow Direction & Application Valve Model Type of Service 80385 Valve Size Flow Direction (Both Ports) inches mm Combining .75 to 12 20 to 300 FTO 80385* Diverting .75 & 1 20 & 25 FTC 80386 Diverting 1.5 to 12 40 to 300 FTO * .75” & 1” (20 & 25mm) sizes are not available in the 80386 diverting configuration. Utilize combining version 80385 and consult factory for details.
CV and Flow Direction 80385 Combining 80386 Diverting C = Common L = Lower U = Upper Body Ratings: ANSI Class 150 through 600 (PN 10 to 100) Sizes: *.75” through 12” (20mm through 300mm) Flow Direction: flow to open (both ports) Flow Characteristic: linear 0% - Plug in Up Position 100% - Plug in Down Position Value Size* Percent of Plug Travel Plug Up Plug Down inches mm .75 20 0 6 0.6 5.4 1.2 4.8 1.8 4.2 2.4 3.6 3 3 3.6 2.4 4.2 1.8 4.8 1.2 5.4 0.6 6 0 1 25 0 9 0.9 8.
Materials of Construction 4 4 3 3 2 2 19 19 5 1 1 5 17 17 18 18 7 12 7 11 13 13 12 11 14 14 8 9 8 9 16 16 15 15 6 6 10 10 13 12 11 13 80385 Combining 9A 12 11 80386 Diverting 9B 9C 9D CH80000 - 80000 Series Three-Way Control Valves | 9
Materials of Construction Valve Sizes: 0.75” to 12” (20mm to 300mm) Body Ratings: ASME Class 150 to 600 Standard Carbon Steel Version Ref. No. Temperature Range Description 1 Plug Stem 2 Packing Flange Nut 3 Packing Flange 4 Packing Flange Stud 5 Drive Nut 6 Valve Bonnet 7 Valve Body 8 Plug Pin Plug 9A - Upper Skirt(1) 9 -4°F 9B - Plug Gasket(1) 9C - Lower Skirt(1) 9D - Jam Nuts(1) 650°F Materials 316 St. St. ASTM 479 TY 316 St. St.
Materials of Construction Valve Sizes: 0.75” to 12” (20mm to 300mm) Body Ratings: ASME Class 150 to 600 Standard Carbon Steel Version Ref. No. Temperature Range Plug Stem 2 Packing Flange Nut 3 Packing Flange 4 Packing Flange Stud 6 Drive Nut Valve Bonnet Extended Version Valve Body 8 Plug Pin Plug 9A - Upper Skirt(1) 9B - Plug Gasket(1) 9C - Lower Skirt(1) 9D - Jam Nuts(1) 10 11 650°F Lower Flange 850°F Materials 316 St. St. ASTM 479 TY 316 St. St.
Materials of Construction Valve Sizes: 0.75” to 12” (20mm to 300mm) Body Ratings: ASME Class 150 to 600 Standard Chrome Moly Version Ref. No. Temperature Range -32°F Description 1 Plug Stem 2 Packing Flange Nut 3 Packing Flange 4 Packing Flange Stud 650°F Materials 316 St. St. ASTM 479 TY 316 St. St. ASTM A194 GR 8 Zinc Dichromate Carbon Steel ASTM A105 304 St. St.
Materials of Construction Valve Sizes: 0.75” to 12” (20mm to 300mm) Body Ratings: ASME Class 150 to 600 Standard Packing Options Ref. No. Temperature Range -20°F Description 450°F 800°F Materials PTFE Packing Packing Standard Bonnet LE® Packing Flexible Graphite Packing 17 PTFE Packing Packing Standard Bonnet LE® Packing Flexible Graphite Packing Ref. No.
Materials of Construction Valve Sizes: 0.75” to 12” (20mm to 300mm) Body Ratings: ASME Class 150 to 600 Standard NACE Version Ref. No. Temperature Range -20°F Description 450°F Standard Operating Materials (1) 316 St. St. ASTM A479 TY 316 (HRC 22 Max.) 1 Plug Stem 2 Packing Flange Nut ASTM A638 Gr 660(2) 3 Packing Flange 4 Packing Flange Stud 5 Drive Nut 6 Valve Bonnet 304 St. St.
Materials of Construction Valve Sizes: 0.75” to 12” (20mm to 300mm) Body Ratings: ASME Class 150 to 600 Standard NACE Version Ref. No. Temperature Range -20°F 450°F Description Standard Operating Materials (1) ASTM A193 GR B7 (non exposed) (3) 12 Body Stud ASTM A193 Gr B7M(4) (exposed) ASTM A193 GR B7 Zinc Plating(3)(5) (non exposed) ASTM A193 Gr B7M Zinc Plating(4)(5) (exposed) 13 Body Gasket 14 Guide Bushing 316L St. St.
Valve Dimensions D E C B F A 80385 Series Dimensions (inches) Valve Size inches .75 ASME Class 150 and equivalent PN ASME Class 300 and equivalent PN ASME Class 600 and equivalent PN RF RF RF mm 20 RTJ RTJ ANSI Class 150-600 and equivalent PN Threaded & Socket Weld RTJ A B A B A B A B A B A B A B 7.24 5.51 7.76 5.51 7.64 5.51 8.11 5.51 8.11 5.51 8.11 5.51 5.98 5.55 1 25 7.24 5.51 7.76 5.51 7.76 5.51 8.27 5.51 8.27 5.51 8.27 5.51 5.98 5.55 1.
80385 Series Dimensions (mm) Valve Size mm 20 inches .75 ASME Class 150 and equivalent PN ASME Class 300 and equivalent PN ASME Class 600 and equivalent PN RF RF RF RTJ RTJ ANSI Class 150-600 and equivalent PN Threaded & Socket Weld RTJ A B A B A B A B A B A B A B 184 140 197 140 194 140 206 140 206 140 206 140 152 141 25 1 184 140 197 140 197 140 210 140 210 140 210 140 152 141 40 1.
Valve Dimensions 80386 Series Dimensions (inches) Valve Size inches ASME Class 150 and equivalent PN ASME Class 300 and equivalent PN ASME Class 600 and equivalent PN RF RF RF mm RTJ RTJ ANSI Class 150-600 and equivalent PN Threaded & Socket Weld RTJ A B A B A B A B A B A B A B .75 20 7.24 5.51 7.76 5.51 7.64 5.51 8.11 5.51 8.11 5.51 8.11 5.51 5.98 5.55 1 25 7.24 5.51 7.76 5.51 7.76 5.51 8.27 5.51 8.27 5.51 8.27 5.51 5.98 5.55 1.5 40 8.74 7.
Valve Dimensions 80386 Series Dimensions (mm) Valve Size mm inches ASME Class 150 and equivalent PN ASME Class 300 and equivalent PN ASME Class 600 and equivalent PN RF RF RF RTJ RTJ ANSI Class 150-600 and equivalent PN Threaded & Socket Weld RTJ A B A B A B A B A B A B A B 20 0.75 184 140 197 140 194 140 206 140 206 140 206 140 152 141 25 1 184 140 197 140 197 140 210 140 210 140 210 140 152 141 40 1.
Valve Weights Body Sub-Assembly with Standard Bonnet (lbs) Valve Size inches mm ANSI Class 150-600 and equivalent PN ASME Class 150 and equivalent PN Threaded & Socket Weld ASME Class 300 and equivalent PN ASME Class 600 and equivalent PN Flanged 0.75 20 33 44 44 70 1 25 33 44 44 70 1.
Actuator Dimensions and Weights (in./lbs) XX D YY C Shown with optional Handwheel Dimensions and Weights Actuator Size Actuator Dimensions (inches) A B (Model 88) C Weights (lbs.) D Standard w/ Handwheel 6 11.50 15.54 (17.52) 10.00 9.00 45 60 10 10 14.50 19.58 (21.54) 10.90 12.00 85 16 16 18.75 28.22 (30.79) 14.00 18.00 210 23 23 21.63 30.71 (33.27) 16.00 18.
Actuator Dimensions and Weights (mm/kg) XX D YY C Shown with optional Handwheel Dimensions and Weights Actuator Size Actuator Dimensions (mm) Weights (kg) A B (Model 88) C D Standard w/ Handwheel 6 302 395 (445) 254 229 20 27 10 373 497 (547) 277 305 39 48 16 476 717 (782) 356 457 95 111 23 549 780 (845) 406 457 120 145 Actuator Removal Clearance = 152 mm Center of Gravity (mm) Limit Stops (mm) Without Handwheel Up Stop Size X Y Size 6 5 248 6 10 0 327
Accessories Options: • Extension Bonnets • Environmental Capabilities (LE Packing) • Lubricator & Isolation Valve • Other Flange Facings • Limit Stops • Body Drain Plug • Reducer and Nipple Connections • NACE Compliance • Custom Trim Materials • U.O.P. Trim Materials • Other Materials • Non-Destructive Examination • Oxygen Cleaning • Electric Actuators For Accessories, consult GE.
DIRECT SALES OFFICE LOCATIONS BELGIUM Phone: +32-2-344-0970 Fax: +32-2-344-1123 KOREA Phone: +82-2-2274-0748 Fax: +82-2-2274-0794 BRAZIL Phone: +55-11-2146-3600 Fax: +55-11-2146-3610 MALAYSIA Phone: +60-3-2161-0322 Fax: +60-3-2163-6312 CHINA Phone: +86-10-8486-4515 Fax: +86-10-8486-5305 MEXICO Phone: +52-5-310-9863 Fax: +52-5-310-5584 FRANCE Courbevoie Phone: +33-1-4904-9000 Fax: +33-1-4904-9010 THE NETHERLANDS Phone: +0031-15-3808666 Fax: +0031-18-1641438 GERMANY Ratingen Phone: +49-2102-108-0 Fax:
