Instructions / Assembly
49-60805-1 Rev. 3 21
INSTALLATION INSTRUCTIONS
REFRIGERATOR LOCATION
Ŷ'RQRWLQVWDOOWKHUHIULJHUDWRUZKHUHWKH
WHPSHUDWXUHZLOOJREHORZ)&EHFDXVH
it will not run often enough to maintain proper 
temperatures.
Ŷ'RQRWLQVWDOOWKHUHIULJHUDWRUZKHUHWKH
WHPSHUDWXUHZLOOJRDERYH)&EHFDXVHLW
will not perform properly.
Ŷ 'RQRWLQVWDOOWKHUHIULJHUDWRULQDORFDWLRQH[SRVHG
to water (rain, etc.) or direct sunlight.
Ŷ,QVWDOOLWRQDIORRUVWURQJHQRXJKWRVXSSRUWLWIXOO\
loaded.
CLEARANCES
Allow the following clearances for ease of installation, 
proper air circulation and plumbing and electrical 
connections.
6LGHV ´PP
7RS ´PP&DELQHW+LQJH&RYHU
%DFN ´PP
Installation Instructions
INSTALLING THE REFRIGERATOR
IMPORTANT NOTES
This refrigerator without the handles ranges from 
´WR´FPFPGHSHQGLQJRQ
your model (see dimension G on the previous page). 
'RRUVDQGSDVVDJHZD\VOHDGLQJWRWKHLQVWDOODWLRQ
ORFDWLRQPXVWEHDWOHDVW´FPLQRUGHU
to leave the doors attached to the refrigerator 
while transporting it into the installation location. 
,ISDVVDJHZD\VDUHOHVVWKDQ´ (91.4 cm), the 
refrigerator doors can easily be scratched and 
damaged. The doors can be removed to allow the 
refrigerator to be safely moved indoors. 
•,I\RXQHHGWRUHPRYHWKHGRRUDQG\RXKDYHWKH
IUHQFKGRRUPRGHOVHH5HPRYLQJ)UHQFK'RRUV
•,I\RXQHHGWRUHPRYHWKHGRRUDQG\RXKDYHWKH
single fresh food door model, see Reversing the 
'RRU
• 7RUHPRYHWKHIUHH]HUGRRUDQG\RXKDYHWKH
PRGHOZLWKDIUHH]HUGUDZHUVHHRemoving 
)UHH]HU'UDZHU
• ,I\RXKDYHWKHPRGHOZLWKWKHKLQJHGIUHH]HUGRRU
see 5HYHUVLQJWKH'RRU
•,ILWLVNOT necessary to remove doors, skip to 
Page 31. Leave tape and all packaging on doors 
until the refrigerator is in the final location. Once in 
place, install door handles (see Steps 1 and 2).
•   SKID REMOVAL: Tilt refrigerator to each side to 
remove skid.
•   NOTE: Use a padded hand truck to move this 
refrigerator. Place the refrigerator on the hand 
truck with a side against the truck. We strongly 
recommend that TWO PEOPLE move and 
complete this installation.
  ATTACH FRESH FOOD 
HANDLE(S)
Attach the handle to the mounting fasteners 
by aligning the slots on the handle with the 
mounting fasteners. Slide the handle down until 
\RXKHDUD³FOLFN´
NOTE: )RU)UHQFK'RRUPRGHOVIROORZWKHVDPH
procedure for both doors.
1
 ATTACH FREEZER HANDLE 
Attach the handle to the mounting fasteners by 
aligning the slots on the handle with the mounting 
fasteners. Slide the handle to the right until you 
KHDUD³FOLFN´
2
Mounting 
)DVWHQHUV
Mounting 
)DVWHQHUV










