Specification

Specification Revised 6/23
GFD65GSSVWW / GFD65GSPVDS
GE
®
7.8 cu. ft. Capacity Front Load Gas Dryer with Steam
For answers to your Monogram, Café
™
,
GE Profile
™
or GE Appliances product questions,
visit our website at geappliances.com or call
GE Answer Center
®
Service, 800.626.2000.
SPECIAL INSTALLATION REQUIREMENTS:
STACKED INSTALLATION:
Brackets for stacking dryer over washer are not included with
the washer. Order part no. GFA28KITN.
ALCOVE OR CLOSET INSTALLATION:
If your dryer is approved for installation in an alcove or closet,
it will be stated on a label on the dryer back.
The dryer MUST be exhausted to the outside.
Minimum clearances between dryer cabinet and adjacent walls or
other surfaces are: 0" all sides and top.*
Closet doors must be louvered or otherwise ventilated and must
contain a minimum of 60 sq. in. of open area equally distributed.
If this closet contains both a washer and a dryer, doors must
contain a minimum of 120 sq. in. of open area equally distributed.
No other fuel-burning appliance shall be installed in the same closet
with a gas dryer.
BATHROOM OR BEDROOM INSTALLATION:
The dryer MUST be exhausted to the outdoors.
The installation must conform with the local codes, or in the
absence of local codes, with the National Electric Code and
National Fuel Gas Code, ANSI Z223 for gas dryers.
MINIMUM CLEARANCE OTHER THAN ALCOVE OR CLOSET
INSTALLATIONS:
Minimum clearances to combustible surfaces 0" all sides and top.*
FOR MORE INFORMATION ON VENTING KITS AND ACCESSORIES,
PLEASE CALL 1-800-GE-CARES.
*For improved performance, a 1/2" clearance is suggested on each side.
**Accessories sold separately.
Labor Warranty Limited 1-year entire appliance
Parts Warranty Limited 1-year entire appliance
DRYER ACCESSORIES**
WARRANTY
GE Part Number Description
WE25M87 LP Conversion Kit
WB64X5025 Touch-up Paint (White) .06 oz.
WR97X27706 Touch-Up Paint (Carbon Graphite) – 0.6 oz
WE02X29449 Dryer Rack Accessory
GFA28DSVN Side Vent Kit
WH41X10207 Inlet Hose
WX17X10001CA Vibration Pads
GFP1528SNWW Pedestal Accessory (White)
GFP1528PTDS Pedestal Accessory (Carbon Graphite)
GFR0728SNWW Riser (White)
GFR0728PTDS Riser (Carbon Graphite)
GFA28KITN Stacking Kit
WEIGHT
-Carton weight 147 lbs.
-Product weight 137 lbs.