SDS

GE5070
Page:5/12
Version:
1.3
Date of issue/Date of revision:
08/03/2015
Date of previous issue:
04/10/2015
including any incompatibilities
container protected from direct sunlight in a dry, cool and well-
ventilated area, away from incompatible materials (see section 10 of
SDS) and food and drink. Store locked up. Keep container tightly
closed and sealed until ready for use. Containers that have been
opened must be carefully resealed and kept upright to prevent
leakage. Do not store in unlabeled containers. Use appropriate
containment to avoid environmental contamination.
Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
None.
Appropriate engineering controls
:
If user operations generate dust, fumes, gas, vapor or mist, use
process enclosures, local exhaust ventilation or other engineering
controls to keep worker exposure to airborne contaminants below
any recommended or statutory limits.
Environmental exposure controls
:
Emissions from ventilation or work process equipment should be
checked to ensure they comply with the requirements of
environmental protection legislation. In some cases, fume scrubbers,
filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures
:
Wash hands, forearms and face thoroughly after handling chemical
products, before eating, smoking and using the lavatory and at the
end of the working period. Appropriate techniques should be used to
remove potentially contaminated clothing. Contaminated work
clothing should not be allowed out of the workplace. Wash
contaminated clothing before reusing. Ensure that eyewash stations
and safety showers are close to the workstation location.
Eye/face protection
:
Safety eyewear complying with an approved standard should be
used when a risk assessment indicates this is necessary to avoid
exposure to liquid splashes, mists, gases or dusts. If contact is
possible, the following protection should be worn, unless the
assessment indicates a higher degree of protection: chemical splash
goggles.
Skin protection
Hand protection
:
Chemical-resistant, impervious gloves complying with an approved
standard should be worn at all times when handling chemical
products if a risk assessment indicates this is necessary. Considering
the parameters specified by the glove manufacturer, check during
use that the gloves are still retaining their protective properties. It
should be noted that the time to breakthrough for any glove material
may be different for different glove manufacturers. In the case of
mixtures, consisting of several substances, the protection time of the
gloves cannot be accurately estimated.
Body protection
:
Personal protective equipment for the body should be selected based
on the task being performed and the risks involved and should be
approved by a specialist before handling this product.
Other skin protection
:
Appropriate footwear and any additional skin protection measures
should be selected based on the task being performed and the risks
involved and should be approved by a specialist before handling this
product.
Respiratory protection
:
Use a properly fitted, particulate filter respirator complying with an