Installation Guide

Before Installing this ballast.
INSTALLATION INSTRUCTIONS FOR ELECTRONIC
FLUORESCENT BALLASTS
(read entire instruction leaflet prior to starting installation work)
1. Remove Power from fixture by switching circuit breaker
powering the fixture to the off position. Caution: Turning off the
fixture’s wall switch may not remove voltage from fixture.
2. For maximum safety and to assure proper starting of
fluorescent lamps, fixture must be grounded. Make sure fixture
is properly grounded per National Electrical Code (NEC).
3. Check and make sure that replacement ballast is the right
ballast for the fixture, input voltage, lamps, sockets, and
application.