SDS

GE Sil II 2.8 oz Metal
Page:6/11
Version
:
1.5
Date of issue
/
Date of revision
:
10/21/2016
Date of previous issue
:
09/27/2016
Odor
:
ammonia
Odor threshold
:
Not available
pH
:
Not applicable.
Melting point
:
Not applicable.
Boiling point
:
Not applicable.
Flash point
:
> 94 °C (> 201 °F) (Estimated.) Product does not fl ash below 93.3C
(200F) during test; no actual flash point >93.3 C was determined.
Burning time
:
Not available
Burning rate
:
Not available
Evaporation rate
:
1
Flammability (solid, gas)
:
Not available
Lower and upper explosive
(flammable) limits
:
Lower:
Not applicable.
Upper: Negligible
Vapor pressure
:
Not applicable.
Vapor density
:
Not available
Relative density
:
1.05
Density
:
1.048 g/cm3
Solubility
:
PARTIAL IN TOLUENE
Solubility in water
:
Insoluble
Partition coefficient: n
-
octanol/water
:
Not available
Auto
-
ignition temperature
:
Not available
Decomposition temperature
:
Not available
SADT
:
Not available
Viscosity
:
Dynamic:
Not available
Kinematic:
Not available
Volatile organic content
:
2.2 % (w/w)
27 g/l
Other information
No additional information.
Section 10. Stability and reactivity
Reactivity
:
Stable under normal conditions.
Chemical stability
:
The product is stable.
Possibility of hazardous reactions
:
Under normal conditions of storage and use, hazardous reactions
will not occur.
Conditions to avoid
:
No specific data.
Incompatible materials
:
No specific data.
Hazardous decomposition
products
:
Under normal conditions of storage and use, hazardous
decomposition products should not be produced.