SDS

Material Safety Data Sheet
Version: 1.5
09/04/2007
GE012A 12C-Crtrg (0.730 Lbs-0.331 Kg)
Silicone Construction Sealant
Page 4/8
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS
Eyewash stations; Showers; Use only in well-ventilated areas.
RESPIRATORY PROTECTION
If exposure limits are exceeded or respiratory irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Supplied air respirators may be required for non-routine or
emergency situations. Respiratory protection must be provided in accordance with OSHA regulations
(see 29CFR 1910.134).
PROTECTIVE GLOVES
Rubber gloves
EYE AND FACE PROTECTION
Safety glasses
OTHER PROTECTIVE EQUIPMENT
Wear suitable protective clothing and eye/face protection.
Exposure Guidelines
Component
CAS RN Source Value
Absence of values indicates none found
PEL - OSHA Permissible Exposure Limit; TLV - ACGIH Threshold Limit Value; TWA - Time Weighted Average
OSHA revoked the Final Rule Limits of January 19, 1989 in response to the 11th Circuit Court of Appeals decision (AFL-CIO v. OSHA)
effective June 30, 1993. See 29 CFR 1910.1000 (58 FR 35338).
9. PHYSICAL AND CHEMICAL PROPERTIES
BOILING POINT - C & F:
Not applicable
VAPOR PRESSURE (20 C) (MM HG):
Not applicable
VAPOR DENSITY (AIR=1):
Not applicable
FREEZING POINT:
Not applicable
MELTING POINT:
Not applicable
PHYSICAL STATE:
Solid
ODOR:
Acetic acid
COLOR:
Translucent
EVAPORATION RATE (BUTYL ACETATE=1):
< 1
SPECIFIC GRAVITY (WATER=1):
ca. 1.04
DENSITY:
ca. 1.04 g/cm3
ACID / ALKALINITY (MEQ/G):
Not applicable
pH:
Not applicable
VOLATILE ORGANIC CONTENT (VOL):
2.8 %(m)
SOLUBILITY IN WATER (20 C):
Insoluble
SOLUBILITY IN ORGANIC SOLVENT (STATE
Toluene