SDS

HD012A 24C(T)
Page:13/14
Version:
1.3
Date of issue/Date of revision:
09/30/2015
Date of previous issue:
07/31/2015
Philippines inventory (PICCS): All components are listed or exempted.
United States inventory (TSCA 8b): All components are listed or exempted.
Korea inventory: All components are listed or exempted.
Taiwan inventory (CSNN): All components are listed or exempted.
Label requirements
:
Contains octamethylcyclotetrasiloxane which may cause reproductive
effects based on animal data.
Hazardous Material Information System III (U.S.A.) :
Health
1
Flammability
1
Physical hazards
0
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks,
and 4 representing significant hazards or risks Although HMIS® ratings are not required on MSDSs
under 29 CFR 1910.1200, the preparer may choose to provide them. HMIS® ratings are to be used with a
fully implemented HMIS® program. HMIS® is a registered mark of the National Paint & Coatings
Association (NPCA). HMIS® materials may be purchased exclusively from J. J. Keller (800) 327-6868.
The customer is responsible for determining the PPE code for this material.
Full text of abbreviated H
statements
:
Not applicable.
History
Date of printing
:
10/05/2016
Date of issue/Date of revision
:
09/30/2015
Date of previous issue
:
07/31/2015
Version
:
1.3
Prepared by
:
Product Safety Stewardship
Key to abbreviations
:
ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From
Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
RID = The Regulations concerning the International Carriage of Dangerous Goods
by Rail
UN = United Nations
References
:
Not available
Notice to reader
Unless otherwise specified in section 1, Momentive products are intended for use in the manufacture and/or
formulation of products and are not intended for direct consumer use. These products are not intended for long-
lasting (> 30 days) implantation, injection or direct ingestion into the human body, nor for use in the
manufacture of multiple use contraceptives.
Keep out of the reach of children.
Further Information
The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and
belief at the date of its publication. The information given is designed only as a guidance for safe handling, use,
processing, storage, transportation, disposal and release and is not to be considered a warranty or quality