SDS

Safety Data Sheet(SDS)
Silicone
Ref:
Q/JL SX01P 03-202001
No.:
SDS21EA252EN-A898
JL Code:
Revision date
Issue Date
2023-02-06
Page:
4/8
If exposure limits are exceeded or if irritation or ot her symptoms are experienced, use a full-face respirat or with multi-
purpose combination (US) or type AXBEK (EN 14387) respirator cart ridges.
Wear protect ive glovessuch as butyl rubber, passing the t ests according to EN 374(EU), US F739 or AS/NZS 2161.1
standard.
T ight ly fit ting safety goggles (approved by EN 166(EU) or NIOSH (US).
Wear fire/flame resistant/retardant clot hing and antist at ic boots.
Select appropriat e prot ect ive clot hing based on chemical resistance data and an assessment of t he local exposure pot ential.
Skin contact must be avoided by using impervious prot ective clothing (gloves, aprons, boots, et c).
Ensure t hat eye flushing systems and safety showers are located close to t he working place.
When using do not eat, drink or smoke.
Wash contaminat ed clothing before reuse.
Do not inhale gases / fumes / aerosols.
9. PHYSICAL AND CHEMICAL PROPERTIES
Paste
Slightly
No information available
Not applicable
No information available
>35
≥93 (Closed cup)
No information available
Not flammable
No information available
No information available
No information available
No information available
0.92~1.12
Insoluble
No information available
No information available
No information available
Non explosive
Non oxidizing
10. STABILITY AND REACTIVITY
Reactivity
Not classified as a react ivity hazard.
Chemical stability
Stable under normal conditions.
Possibilit y of hazardous
reactions
No information available.
Possibilit y of hazardous
reactions
Incompatible materials, heat , flame and spark.
Incompatible materials
No information available.