Installation guide

Design information
MODELS AVAILABLE
GCG1580SS
GCG1500BB
GCG1500WW
GCG1700I1"
ZCGS150SS
ZCGP150I1"
*For ZCGP150II and GCG1700II, also refer
to the instructions provided on the template
packed with those models.
PRODUCT DIMENSIONS AND CLEARANCES
24" (61 cm)
min
15-1/8"
(38.4cm)
min
34" (86.4cm)
to
35"
!88.9 cm)
Locate the outlet 18" (45.7 cm) rain
from the floor, 3" (7.6 cm}rain from
either side
23" (58.4 cm)
33-3/4"
(85.8cm)
min.
to
35" (88.9 cm)
max.
• Allow 23" (58.4 cm)
clearance atthe front for
a full drawer opening,
• Allow 6"(15.2 cm)
clearance on the right
side to the nearest
vertical wall or cabinet
for bag removal.
• Nete: This compactor is
designed for built-in
applications only.
TOOLS REQUIRED
.Level
• Phillips Screwdriver
• Pliers
•Gloves
• Measuring Tape
PARTS SUPPLIED
• 6 mounting screws (located in the literature package)
• 2 countertop retaining brackets
• 2 side mounting clips
3