Brochure

ERESCO MF4 3
MF Technology for constant potential high dose output
Control Unit
Applications
• Standard radiographic inspections, such as
those carried out in fabrication yards in the
oil and gas segment, in power plants, in the
automotive sector and in general
engineering.
• Oil and Gas segments require inspections in
extreme conditions, such as pipeline
inspections - both offshore and land-based
applications - where equipment have to
withstand hostile environment like very low
or very high ambient temperature or
permanent exposure to salt-water, sand or
dirt.
• Structural integrity testing in the aerospace
segment, where special materials,
honeycomb sections and composites
demand exceptional tube performance.
With direct emission and panoramic emission models and water- cooled and air-cooled versions, as well as small focal spot
radioscopy units, the ERESCO MF4 range offers a comprehensive solution to meet virtually all customer portable X-ray generation
needs.
A medium frequency output (around 20 kHz) can be used to produce a high power output with extremely low ripple.
The portable ERESCO X-ray digital
control can operate any X-ray
generator in the MF4 range. It
features modern, power
electronics and is ruggedly
constructed to with-
stand heavy use in the eld.
The MF4 Control faciliates a ergonomical interaction concept for
safe and efcient operation unit operation. Several on-board
features, such as Exposure Calculator, Parameter Monitoring or
Programming / Reporting tools are simplying inspections.
A large, back-lit, full graphic, transreective display allows easy
viewing even in very strong sunlight and provides details of the
system status in up to 19 languages supporting different
character-sets. All operating and setup parameters can be
entered by means of function keys, an alphanumeric keypad
and cursor keys. Menu driven interfaces complete the ease of
use. Alternatively setup parameters can be retrieved from a
bank of 250, pre-entered exposure programmes, stored in a
non-volatile memory. In addition, these programs can be
uniquely named or commented and can be downloaded,
modied, uploaded and archieved. In power operation, the
maximum tube current is calculated and set, so minimising
exposure times. Besides interfaces for warning lamps, interlocks
and pumps, the MF4 control also offers a serial interface for
external control or communication with PC based tools.
The ERESCO MF4 range of X-ray generators nds application throughout the industrial spectrum in the inspection of welds and in the
examinations for structural integrity.
32 mm
Simple X-Ray Unit
6
38 mm
Basic CP Unit
6
42 mm
ERESCO MF High
Performance Unit
6
Output Power of the ERESCO MF Units
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
High Voltage Out
High Voltage Out
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
Mains Power In
Mains Power In
AC Waveform
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
2
ERESCO MF4
MF Technology for constant potential high dose output
Control Unit
Applications
• Standard radiographic inspections, such as
those carried out in fabrication yards in the
oil and gas segment, in power plants, in the
automotive sector and in general
engineering.
• Oil and Gas segments require inspections in
extreme conditions, such as pipeline
inspections - both offshore and land-based
applications - where equipment have to
withstand hostile environment like very low
or very high ambient temperature or
permanent exposure to salt-water, sand or
dirt.
• Structural integrity testing in the aerospace
segment, where special materials,
honeycomb sections and composites
demand exceptional tube performance.
With direct emission and panoramic emission models and water- cooled and air-cooled versions, as well as small focal spot
radioscopy units, the ERESCO MF4 range offers a comprehensive solution to meet virtually all customer portable X-ray generation
needs.
A medium frequency output (around 20 kHz) can be used to produce a high power output with extremely low ripple.
The portable ERESCO X-ray digital
control can operate any X-ray
generator in the MF4 range. It
features modern, power
electronics and is ruggedly
constructed to with-
stand heavy use in the eld.
The MF4 Control faciliates a ergonomical interaction concept for
safe and efcient operation unit operation. Several on-board
features, such as Exposure Calculator, Parameter Monitoring or
Programming / Reporting tools are simplying inspections.
A large, back-lit, full graphic, transreective display allows easy
viewing even in very strong sunlight and provides details of the
system status in up to 19 languages supporting different
character-sets. All operating and setup parameters can be
entered by means of function keys, an alphanumeric keypad
and cursor keys. Menu driven interfaces complete the ease of
use. Alternatively setup parameters can be retrieved from a
bank of 250, pre-entered exposure programmes, stored in a
non-volatile memory. In addition, these programs can be
uniquely named or commented and can be downloaded,
modied, uploaded and archieved. In power operation, the
maximum tube current is calculated and set, so minimising
exposure times. Besides interfaces for warning lamps, interlocks
and pumps, the MF4 control also offers a serial interface for
external control or communication with PC based tools.
The ERESCO MF4 range of X-ray generators nds application throughout the industrial spectrum in the inspection of welds and in the
examinations for structural integrity.
32 mm
Simple X-Ray Unit
6
38 mm
Basic CP Unit
6
42 mm
ERESCO MF High
Performance Unit
6
Output Power of the ERESCO MF Units
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
High Voltage Out
High Voltage Out
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
Mains Power In
Mains Power In
AC Waveform
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
2
ERESCO MF4
MF Technology for constant potential high dose output
Control Unit
Applications
• Standard radiographic inspections, such as
those carried out in fabrication yards in the
oil and gas segment, in power plants, in the
automotive sector and in general
engineering.
• Oil and Gas segments require inspections in
extreme conditions, such as pipeline
inspections - both offshore and land-based
applications - where equipment have to
withstand hostile environment like very low
or very high ambient temperature or
permanent exposure to salt-water, sand or
dirt.
• Structural integrity testing in the aerospace
segment, where special materials,
honeycomb sections and composites
demand exceptional tube performance.
With direct emission and panoramic emission models and water- cooled and air-cooled versions, as well as small focal spot
radioscopy units, the ERESCO MF4 range offers a comprehensive solution to meet virtually all customer portable X-ray generation
needs.
A medium frequency output (around 20 kHz) can be used to produce a high power output with extremely low ripple.
The portable ERESCO X-ray digital
control can operate any X-ray
generator in the MF4 range. It
features modern, power
electronics and is ruggedly
constructed to with-
stand heavy use in the eld.
The MF4 Control faciliates a ergonomical interaction concept for
safe and efcient operation unit operation. Several on-board
features, such as Exposure Calculator, Parameter Monitoring or
Programming / Reporting tools are simplying inspections.
A large, back-lit, full graphic, transreective display allows easy
viewing even in very strong sunlight and provides details of the
system status in up to 19 languages supporting different
character-sets. All operating and setup parameters can be
entered by means of function keys, an alphanumeric keypad
and cursor keys. Menu driven interfaces complete the ease of
use. Alternatively setup parameters can be retrieved from a
bank of 250, pre-entered exposure programmes, stored in a
non-volatile memory. In addition, these programs can be
uniquely named or commented and can be downloaded,
modied, uploaded and archieved. In power operation, the
maximum tube current is calculated and set, so minimising
exposure times. Besides interfaces for warning lamps, interlocks
and pumps, the MF4 control also offers a serial interface for
external control or communication with PC based tools.
The ERESCO MF4 range of X-ray generators nds application throughout the industrial spectrum in the inspection of welds and in the
examinations for structural integrity.
32 mm
Simple X-Ray Unit
6
38 mm
Basic CP Unit
6
42 mm
ERESCO MF High
Performance Unit
6
Output Power of the ERESCO MF Units
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
High Voltage Out
High Voltage Out
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
Mains Power In
Mains Power In
AC Waveform
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
-
+
o
+
o
-
+
o
-
+
o
-
+
o
2
ERESCO MF4
The portable ERESCO X-ray digital
control can operate any X-ray
generator in the MF4 range.
It features modern power
electronics and is ruggedly
constructed to withstand
heavy use in the field.
The MF4 Control faciliates an ergonomical interaction concept
for safe and efficient unit operation. Several on-board
features, such as Exposure Calculator, Parameter Monitoring
or Programming / Reporting tools are simplifying inspections.
A large, back-lit, full graphic, transreflective display allows easy
viewing even in very strong sunlight and provides details of
the system status in up to 19 languages supporting different
character-sets. All operating and setup parameters can be
entered by means of function keys, an alphanumeric keypad
and cursor keys. Menu driven interfaces complete the ease
of use. Alternatively setup parameters can be retrieved from
a bank of 250 pre-entered exposure programmes, stored in
a non-volatile memory. In addition, these programs can be
uniquely named or commented and can be downloaded,
modified, uploaded and archived. In power operation, the
maximum tube current is calculated and set, so minimizing
exposure times. Besides interfaces for warning lamps, interlocks
and pumps, the MF4 control also offers a serial interface for
external control or communication with PC based tools.
The ERESCO MF4 range of X-ray generators finds application throughout the industrial spectrum in the inspection of welds
and in the examinations for structural integrity.
Applications
With direct emission and panoramic emission models as well as small focal spot radioscopy units, the ERESCO MF4
range offers a comprehensive solution to meet virtually all customer portable X-ray generation needs.
• Standard radiographic inspections, such
as those carried out in fabrication yards
in the oil and gas segment, in power
plants, in the automotive sector and in
general engineering.
• Oil and Gas segments require inspections
in extreme conditions, such as pipeline
inspections — both off-shore and land-based
applications — where equipment have to
withstand hostile environment like very low or
very high ambient temperature or permanent
exposure to salt-water, sand or dirt.
• Structural integrity testing in the
aerospace segment, where special
materials, honeycomb sections and
composites demand exceptional
tube performance.
MF Technology for constant potential high dose output
A medium frequency output (around 20 kHz) can be used to produce a high power output with extremely low ripple.