Installation Guide

ManualsBrandsGE ManualsIndoor FixturesGE EP Series

(Series EP14)

Lighting Solutions

imagination at work

Suspended LED Fixture

Features

• Long life (50,000 hour rated life)

• 5 year warranty

• IP30

• Dry location rated

Lumination

LED Luminaires

BEFORE YOU BEGIN

Read these instructions completely and carefully.

Save These Instructions

Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

WARNING/AVERTISSEMENT

RISK OF ELECTRIC SHOCK

• Turn power off before inspection, installation or removal.

• Properly ground electrical enclosure.

RISK OF FIRE

• Follow all IEC and local codes.

• Use only UL or IEC approved wire for input/output connections.

Minimum size 18 AWG (0.82mm

RISQUES DE DÉCHARGES ÉLECTRIQUES

• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.

• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation

électrique.

RISQUES D’INCENDIE

• Respectez tous les codes IEC et codes locaux.

• N’utilisez que des ls approuvés par UL ou IEC pour les entrées/sorties de

connexion. Taille minimum 18 AWG (0.82mm

Installation Guide

Summary of content (6 pages)

PAGE 1
Installation Guide GE Lighting Solutions Lumination LED Luminaires TM Suspended LED Fixture (Series EP14) Features • Long life (50,000 hour rated life) • 5 year warranty • IP30 • Dry location rated BEFORE YOU BEGIN Read these instructions completely and carefully. WARNING/AVERTISSEMENT RISK OF ELECTRIC SHOCK • Turn power off before inspection, installation or removal. • Properly ground electrical enclosure. RISK OF FIRE • Follow all IEC and local codes.
PAGE 2
Define Distance Between Canopy Sets Single unit installation scenario: Canopy set 1179mm (46.4 in.) (distance between canopy sets) Luminaire Multiple units in series installation scenario: 1193mm (47 in.) 1207mm (47.5 in.) 1207mm (47.5 in.) 1207mm (47.5 in.) 1st luminaire 2nd luminaire 3rd luminaire 4th luminaire 1193mm (47 in.) 5th luminaire Distance between canopy sets for left and right luminaires = 1193mm (47 in.) Distance between canopy sets for luminaires in the middle = 1207mm (47.5 in.
PAGE 3
Unit Installation To driver enclosure Junction box in ceiling Bracket bar 1 Carefully unpack unit from its packaging. Properly inspect for defects before installing. Wear work gloves to prevent dirt and oil from being transferred to the luminaire. 2 Attach bracket bar to junction box in ceiling with two 8-32 (M4) screws. Repeat on other side.
PAGE 4
Optional Mounting Method - Connecting Suspended Fixtures in Series Canopy set without power cable Canopy sets with power cable 1 For multiple units installed in series, all canopy sets will have a power cable except the last canopy. Disconnect suspension wire Remove “Y” shape wires “Y” shape suspension wire Bracket 2nd luminaire 1st luminaire 2 On the 1st luminaire, disconnect the right-side suspension wire and “Y” shape suspension wire.
PAGE 5
Electrical Connections Remove cover 1/4-20 screws Install fittings 1 Remove driver enclosure cover. Carefully remove knockout for AC line input wires. Install listed electrical fittings in the knockout holes for wire protection. 2 Install driver enclosure to a suitable structural member using two 1/4-20 screws. 4 Replace electrical enclosure cover. Remove protective film from the face of the luminaire.
PAGE 6
Maximum Driver Remote Mounting Distance Supply Wire Gauge Wire Length* 18 AWG (0.82 mm ) 59.0 ft. (18 m) 16 AWG (1.31 mm ) 98.4 ft. (30 m) 14 AWG (2.08 mm2) 154.2 ft. (47 m) 12 AWG (3.31 mm2) 249.3 ft. (76 m) 2 2 * Includes fixture’s 6.6 ft. (2.0 m) power cord Specifications Input Voltage (VAC) 120 – 277V Input Power (W) 55W Input Frequency (Hz) 50/60 Hz Power Factor > 0.9 THD < 20% Control 0-10V & DALI Ceilings Cable Suspension System Warranty 5 years Dimensions 47.5 in. x 11.