Installation Guide
These instructions do not purport to cover all details or variations in equipment nor to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further information be desired or should particular problems arise which are not
covered suciently for the purchaser’s purposes, the matter should be referred to GE Lighting Solutions.
35-201578-211 (Rev 06/25/13)
English
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company.
Evolve and the GE brand and logo are trademarks of the General Electric Company.
© 2013 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
MAINTENANCE / CLEANING
7
• To maintain the highest optical eciency, occasional
cleaning of the outer lens surface may be needed,
with frequency dependent on local conditions.
• Use a mild soap or detergent, which is essentially
neutral pH (pH approximately 6 to 8), nonabrasive,
and which contains no chlorinated or aromatic
hydrocarbons.
• Wash thoroughly, using a soft cloth.
• Rinse with clean, cold water and wipe dry.
WARNING
Risk of electric shock. Make certain power is o before
attempting any maintenance.
GE_GEH-6019 _AreaLightingEvolve_LED_EADC_Installation_FINAL_EngFre_062513.indd 4 6/25/2013 12:50:44 PM