ge.com Safety Instructions Operating 2-4 Instructions Control Panels O. ........ ................ Control Settings ............... Drger Features .................. Loading and Using the Drger Reversing the Door ............. Venting the Drger .............. Troubleshooting DPSE810 5, 7 DPSR610 6, 8 9 .... 11 10 12 Tips ... 13, 14 Consumer Support Consumer Support ............. Warrantg .....................
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. ik WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or death. • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or ang other appliance. • Installation and service must be performed by a qualified installer, service agency or the gas supplier.
ge.com YOUR LAUNDRY AREA • Keep the area underneath and around your appliances free of combustible materials (lint, paper, rags, etc.),gasoline, chemicals and other flammable vapors and liquids. Keep the floor around gour appliances clean and dry to reduce the possibilitg of slipping. • Keep all laundry aids (such as detergents, bleaches, etc.)out of the reach of children, preferably in a locked cabinet. Observe all warnings on container labels to avoid injury. • Never climb on or stand on the dryer top.
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. ,& WARNING! WHEN USING YOUR DRYER (cont.) • Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,or has missing or broken parts, including a damaged cord or plug. • The interior of the machine and the exhaust duct connection inside the dryer should be cleaned at least once a year by a qualified technician. See the Loading and Using the Dryer section.
About the control panel-for model DPSE810. go.cam Step 3 • Shut door • Select Drg Cgcle • Cleon lint filter • Add clothes • Push START NOTE: When making a selection with any knob, simply point the knob anywhere for that setting. Model Step 4 within the shaded range DPSE810 OPTmONS TEMPERATURE DRYNESS START 0 STOP/PAUSE .-. .,a_ About the control settings.
About the control settings. Temperature II_ HIGH For regular to heavy cottons. MEDIUM For synthetics, blends, delicates and items labeled permanent press. LOW For delicates, synthetics and items labeled tumble dry Iouz EXTRA LOW For delicates, synthetics and items labeled tumble dry low NO HEAT For fluffing items without Dryness--Selection heat. For use only with the TIMED DRY cycles. only used for SENSOR cgcles. Timed Cgcles run for the selected time at the selected temperatures.
About the control panel-for model DPSR610. ge.com Step 3 • Shut door • Select Drg Cgcle • Clean lint filter • Add clothes • Push START NOTE: When making a selection with ang knob, simplg point the knob angwhere for that setting. Model Step 4 within the shaded range DPSR610 SIGNAL TEMPERATURE WRINKLE CARE !i : STOP/PAUSE H m • m About the control settings. mEnd of Cycle Signal This signal will sound at the end of the cgcle to remind gou to remove the clothes.
About the control settings. IMPORTANT: Clean the lint filter each time you use the dryer. Temperature e HIGH HEAT For regular to heavy cottons. MEDIUM HEAT For synthetics, blends, delicates and items labeled permanent press. NO HEAT For fluffing items without heat. For use only with the TIMEDDRY cycles. LOW HEAT For delicates, synthetics and items labeled tumble drLl low. Wrinkle Care Use this option to minimize the wrinkles in clothes. It provides approximately clothes are dry.
About the dryer features, Dryness Dryness Sensor Cycle gecom Sensor Cycle [onsomemodels) This feature is only activated in the COTTONS,EASYCAREand DELICATES cycles. The Dryness Sensor provides greater drying accuracy than standard machines, resulting in shorter dry times and better clothes care. As the clothes tumble, they touch a moisture sensor. The sensor will stop the heating cycle as soon as the clothes have reached the selected dryness.
About reversing the door. Reversing the Door Tools needed: • Standard #2 Phillips screwdriver ) • Tope-tipped putts knife F_l Open the door and remove the filler plugs opposite the hinges. With the door completelu open, remove the bottom screw from each hinge on the druer face. Insert these screws about half way into the TOP holes, for each hinge, on the opposite side (where 9ou removed the filler plugs). Applu firm pressure to get the screw started in new holes.
About loading and using the dryer. ge.com Always follow the fabric manufacturer's care label when laundering. Sorting and Loading Hints As a general rule, if clothes are sorted properly for the washer, theg are sorted properly for the dryer Do not overload. This wastes energy and causes wrinkling. Do not odd fabric softener sheets once the load has become worm. Theg meg cause fabric softener stains.
About venting the dryer. For the best drying performance, the dryer needs to be properly vented. The dryer will use more energy and run longer if it is not vented to the below specifications. Carefullg follow the details on Exhausting in the Installation Instructions. • Use only rigid metal 4" diameter ductwork inside the dryer cabinet. Use only rigid metal or flexible metal 4" diameter ductwork for exhausting to the outside. • Do not use plastic or other combustible ductwork.
Before you call for service.., gecom Troubleshooting Tips Save time and manes! Review the charts on the fallowing pages, or visit ge.com. You mag not need to call for service. Problem Possible Dryer doesn't start Drger is unplugged • Hake sure the drger plug is pushed completelg into the outlet. Fuse is blown/circuit breaker is tripped • Checkthe house fuse/circuit breaker box and replace fuse or reset breaker.NOTE:Host electric drgers use two fuses/breakers.
Before you call for service... Problem Possible Causes What To Do Clothes take too long todr u Improper sorting • Separate heavy items from lightweight items (generally, a well-sorted washer load is a well-sorted dryer load). Large loads of heavy fabrics (like beach towels) • Large,heavy fabrics contain more moisture and take longer to dry. Separate large, heavy fabrics into smaller loads to speed drying time. Controls improperly set • Match control settings to the load you are drying.
GE Dryer Warranty. All warranty support provided by our Factory Service Centers, Staple your receipt here. Proof of the original purchase dote is needed to obtain or an authorized Customer Care ®technician. To schedule service, on-line, 24 hours a dog, visit us at ge.com or call 800.GE.CARES (800.432.2737). Please have serial number and model number available when calling for service. support under the warranty.
Consumer Support. GEAppliances Website ge.com Have a question or need assistance with gour appliance? TrUthe GEAppliances Website 24 hours a dag, any dag of the gear! For greater convenience and faster service, gou can now download Owner's Manuals, order parts or even schedule service on-line. Schedule Service ge.com Expert GErepair service is onlUone step awag from your dooE Get on-line and schedule your service at your convenience 24 hours any day of the year! Or call 800.GE.CARES (800.432.
