Brochure

Rotors
Integral Tip Solid Pole
The pole tips or shoes on this rotor are
machined from the single rotor forging.
All other features are the same as the
bolted tip rotor. Solid poles hold a
strip-on-edge field winding. These types
of rotors are used in special 60 Hz
applications or otherwise specified
by customers requiring maximum
durability.
Cylindrical Wound
~ 2[Pbb7fX]SX]VcTRW]^[^Vh
~ 8\_a^eTScWTa\P[_TaU^a\P]RT
~ ;P\X]PcTSR^aT
~ 3XbcaXQdcTSfX]SX]V
This rotor is used in applications
where a distributed winding is
required. The rotor body is made from
laminations with slots to take the
windings. The windings are placed into
slot-liners when inserted and wedged
in at the surface, similar to stator
winding technology. There are winding
retaining rings at each end of the rotor
to prevent movement.
9 GE I Power Conversion