User Manual imagination at work Getting Started GE Digital Camera Smart Series : C1640W Basic Operation Camera Function Controls Playback Using the Menus Camera Connectivity Appendix EN
WARNING Do not expose the camera battery pack or other accessories to rain or humidity to avoid a potential fire hazard or possible electric shock. For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE This symbol [crossed-out wheeled bin WEEE Annex IV] indicates separate collection of electrical and electronic waste in the European countries. Please do not throw the equipment into the waste. Please recycle and dispose of properly.
SAFETY PRECAUTIONS Camera Notes: Do not store or use the camera in the following environments: • In the rain, in humidity or dusty environments. • Do not heat the battery or throw it into a fire. • In a place where the camera can be exposed directly to sunlight or subject to high temperatures, e.g. inside a closed car in summer. Keep the battery out of reach of babies and small children. • In a place where the camera is subject to a high magnetic fields, e.g. near motors, transformers or magnets.
BEFORE YOU START Preface Thank you for purchasing this GE digital camera. Please read this manual carefully and keep it in a safe place for future reference. Copyright © Copyright 2013 General Imaging Company. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form, by any means, without the prior written permission of General Imaging Company.
• Do not expose the lens to direct sunlight for extended periods. • Download all pictures and remove the batteries from the camera if you are going to store the camera for long periods of time. • Do not use abrasive cleansers, alcohol-based or solventbased cleaners to clean the camera. To clean, wipe the camera with a slightly damp, soft cloth. About This Manual This manual provides you with instructions on how to use your GE digital camera.
CONTENTS WARNING................................................................ i Set Display Language..................................................... 13 SAFETY PRECAUTIONS......................................... ii Set Date/Time................................................................... 14 BEFORE YOU START.............................................. 1 Preface...........................................................................................1 Copyright...........................
Beach.................................................................................. 25 Night Portrait.................................................................... 26 Sunset................................................................................. 25 Sketch................................................................................. 26 Fireworks........................................................................... 25 Anti-shake..................................................
Thumbnail View........................................................................ 35 Movie Mode Menu.................................................................... 45 Using Zoom on Playback (for still pictures only)................ 36 Image Pixel........................................................................ 45 Using the Delete Button.......................................................... 37 Playback Menu..........................................................................
Format Memory................................................................ 53 Print without Date........................................................... 62 Copy to Card (Copy internal memory to memory card)................................................................... 54 Print Index......................................................................... 63 File Numbering................................................................. 54 Print DPOF (Digital Print Order Format)..............
GETTING READY Package Contents Your package should contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact General Imaging.
Camera Views Front View Back View 1 2 3 4 5 6 7 8 9 10 Right View 15 11 14 12 13
Top View Bottom View 18 19 20 Left View 16 17 21 22 23 1 Flash 13 Delete/Down Button 2 AF Assist Beam/Timer indicator 14 Auto-Timer Shooting Button/Left Button 3 Mic 15 Function/SET Button 4 Lens 16 USB/AV Port 5 LCD Screen 17 Wrist Strap Mount 6 Zoom Button 18 Speaker 7 Power Indicator 19 Power Button 8 Playback Button 20 Movie button 9 Menu Button 21 Shutter Button 10 Mode Selection Button 22 Tripod Mount Point 11 Disp/Up Button 23 Memory Card/Battery Co
Insert the Battery and SD/SDHC Card (card not included) 1. Open the battery compartment. 10 2. Insert the battery while observing the correct polarity.
3. Insert an SD/SDHC card (not included) into the memory card slot as shown. 4. Close the battery compartment.
Optional SD/SDHC cards are not included. The use of 64 MB to 32 GB memory cards from recognized manufacturers such as SanDisk, Panasonic and Toshiba are recommended for reliable data storage. To remove the SD/SDHC card, open the battery compartment and gently push the card to release it. Pull the card out carefully. Turning On and Off Press the Power button to turn the camera on. To turn the camera off, press the Power button again.
Setting Language and Date/Time The Date/Time and Language setup page will automatically appear when the camera is turned on for the first time. To set the display language and date/time, go to the following setup options in the General Setup Menu. • Language • Date/Time To access the General Setup Menu, follow the steps below: 1. Press the Power button to turn the camera on. func 2. Press the menu button, press Up/Down button to switch between menus, select Set Menu, press SET button to enter Set Menu.
Set Date/Time 1. In the General Setup Menu, press Up/Down button to select Date/Time, press SET or Right button to enter setting mode. 2. Press Up/Down to select the date display mode, press right button to select the item to be set, press Up/Down button to select the required value. 3. Press the SET button to confirm the setting.
About the LCD Screen When you turn the camera on, various icons are shown on the LCD screen to indicate the current camera settings and status. To learn more about the displayed icons, see “LCD Screen display” on page 17. LCD Screen Notes: Extremely high-precision technology has been used to manufacture the LCD screen so that most of the pixels are operational for use. However, there may be some minute points (black, white, red, blue or green) that consistently appear on the LCD screen.
Using the Modes Display Setting Press the button to toggle between these modes: Default, Grid, and Clean. Default mode: Display the camera parameters on screen 1234 -0.3 EV 400 ISO Grid: Camera parameters with Grid and Histogram 1234 -0.
LCD Screen Display Still Picture Mode Display 1 Shooting Mode Icons Mode: 1 3 2 4 13 12 15 400 ISO 11 16 x3.5 1234 Manual Mode Scene Mode Panorama Mode 6 3 Zoom 7 4 Remaining number of pictures 8 5 SD Memory card/built-in memory 9 -0.3 EV Auto Mode 2 Macro Mode 1234 x3.
14 AF Mode Single-AF Multi-AF 15 Flash Mode Force Off 2sec 10sec Smile 17 Continuous Shot Flash Auto Off Force Flash On Slow Sync. Slow Sync.
Video Shooting Mode Display 5 Remaining time for video recording Mode : 6 SD Memory Card/Built-in Memory 7 Battery Status 1 2 3 4 5 8 Video Quality 6 9 Picture Color 10 Exposure Compensation (EV value) 00:56 7 11 8 9 -0.3 EV 11 Metering For optimal video shooting, it is recommended that a SD memory card be used. If you shoot video using only the internal memory, the results may have image jitter, noise and shortened recording times.
Playback Mode Display 1 DPOF File Mode : 2 File Protection 3 Memory Space (this picture/total number of pictures) 1 4 SD Memory Card/Built-in Memory 3 2 5 Battery Status 6/45 4 5 7 Image Zoom Ratios 8 Image Zone 10 9 Shooting Date 6 7 8 15:37 3 9 20 6 Zoom Magnification Area 10 Red-Eye Reduction
Using the Mode Button This GE camera provides a convenient Mode Button that allows you to switch easily between different modes. After pressing the mode button to enter the mode selection menu, press the Left/Right button to choose the selected mode. Press the SET button to confirm your selection.
Manual Mode M Shooting in Auto Mode Auto Mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photo settings for best results. Follow these steps: 1. Press mode button to select Auto Mode ( When selecting EV/ISO. (Manual Exposure) Mode, you can set 1. Press mode button to select Manual Exposure Mode press SET to confirm. , ). 2. Compose your picture in the LCD screen and press the Shutter button halfway to focus on the subject. 3.
Panorama Panorama Mode allows you to create a panoramic picture. The camera will automatically compose a panoramic picture using the individual shots that you take. Follow these easy steps to create a panoramic picture: 1. Press mode button to select Panorama Mode ( ). 2. Use the Left/Right buttons to specify the direction of picture taking, and then in 2 seconds the panoramic sequence will commence automatically. 5.
Manual Scene Mode (SCN) In Manual Scene Mode, you can select from a total of 23 scene types to match your needs. Select the desired scene for the occasion and the camera will automatically adjust the optimal settings for you. Press the SET button to enter Scene Mode. The LCD will display a menu like the example below: Select a scene using the Up/Down/Left/Right button and press the SET button.
Mode name Auto Scene Description Identifies the scene automatically; Person, Backlighting, Landscape, Macro, Night Scene, Night Scene with subject, Auto. Landscape For landscapes. Vivid reproduction of green and blue. Sport For fast-moving subjects. Capture sharp action shots with minimal blur. This mode is not recommended for shooting indoors. Beach For taking pictures in areas with strong sunlight. Sunset For sunsets. Capture subjects in strong sunlight. Fireworks For fireworks at night.
Mode name 26 Description Panning Shot Produces background image blur that emphasizes the motion of the main subject. Text For taking pictures of text, documents or white boards. Portrait The best setting for portrait shooting, enables AE/AF for faces. Fish Eye For interesting fish eye effect. Party For taking pictures of large groups or in areas with uneven lighting. Indoor For indoor settings. Reduce blur and improve color accuracy. Leaf For plants.
Auto Scene Mode (ASCN) In the "ASCN" mode, different recording conditions are detected intelligently and the most suitable settings will be automatically selected. Icon Mode name Icon Mode name Landscape Mode Night Landscape Mode Portrait Mode Macro Mode Night Portrait Auto Mode Backlit Portrait To use "ASCN": 2. Hold the camera steadily and aim at the subject. The optimum scene mode will be selected automatically. 3. Press the Shutter button halfway down to focus. 4.
Mode name 28 Description Landscape Mode For landscapes, ASCN will automatically adjust the exposure and reproduce vivid green and blue colors. Portrait Mode The best mode for shooting portraits, enables AE/AF for faces. Night Portrait When you take portraits at night, or in low light conditions, ASCN will automatically adjust the exposure for people and night scenes.
BASIC OPERATION Shooting in Auto Mode Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photos for best results. Using the Zoom Function Your camera is equipped with two types of zoom functions: optical zoom and digital zoom. Press the Zoom button of the camera to zoom in or out on the subject while taking pictures. To start shooting, do the following: 1. Press the Power button to turn the camera on. 2.
Basic Function Menu The Basic Function menu includes flash, self-timer, macro, and continuous capture. • Force Flash The flash will fire with each shot even if there is enough available light to take the photo without flash. • Slow Sync. This allows for night scenery photos that include people in the foreground. The use of a tripod is recommended when shooting with this setting. • Slow Sync. + Red-Eye Using this mode for slow synchro shots with red-eye reduction.
Self-Timer Setting Use this function to take pictures at pre-set intervals. The camera shutter speed can be set for 2 seconds, 10 seconds or by smile detection. 1. Press button to enter function menu. • Self-timer Off Disables the self-timer. • Self-timer 2sec A single picture is shot 2 seconds after the Shutter button is pressed. • Self-timer 10sec A single picture is shot 10 seconds after the Shutter button is pressed.
Macro Mode The Macro setting is ideal for shooting small objects or closeup photos. This mode allows you to focus on subjects very close to the camera. 1. Press button to enter macro function menu. SET Function Menu The SET function menu of the camera includes EV, ISO. The appropriate function setting can give you better photographs and videos. Exposure Compensation The exposure compensation feature allows you to adjust the light exposure value to control the brightness of the image. 1.
ISO The ISO function allows you to set the sensitivity of the camera's sensor to light. To improve the performance in darker environments, a higher ISO value is required. On the other hand, a lower ISO value is needed when in bright conditions. (The ISO setting is only available when the camera is in the M Manual mode). Blink Detection Blink Detection is enabled by default unless disabled by the user.
PLAYBACK Viewing Photos and Videos To view the captured photos and video clips on the LCD screen: 1. Press the button to enter the Playback mode. The last recorded photo or video clip will appear. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card. 3. To play a selected video clip, press the SET button to enter the movie playback mode. During video playback, the operating instructions will appear on the screen.
When playing a movie, press the Up/Down button to increase or decrease the volume. To mute the audio, press and hold the Down button until the appears. Thumbnail View When in playback mode, press on the zoom button to display thumbnail images of photos and videos on the screen. W 00:00:47 00:01:23 Zoom out T Zoom in 1. Slide the zoom lever to switch between 3x3 and 4x4 thumbnails. 2.
If the indicator appears on the LCD, then a movie file is currently being displayed. Press the SET button to restore a preview icon to its original image size. Using Zoom Playback (for still pictures only) The zoom buttons can also be used during playback. This allows you to magnify photos between 2x to 8x. 1. Press the button to switch to playback mode. 2. Use the Left/Right navigation buttons to select a photo to magnify. 3. Press the on the zoom button to zoom in. 4.
Using the Delete Button In Playback Mode, you can press the Down/Delete button to delete pictures or videos. To delete pictures or videos: 1. Press the button to enter the Playback Mode. 2. Select a picture or video clip you want to delete with the Left/Right button. 3. Press the Down/Delete button and the delete screen will appear. 4. Select Delete One or the Back option with the Up/Down button and press the SET button for confirmation. Erased photos/video clips cannot be recovered.
USING THE MENUS Still Menu Size Mode: In any of the above Photo Modes, press the button to go to the Photo Setup Menu. To adjust each setting: In the shooting menu, press Up/Down button to switch between shooting menu and camera setting menu. Select the screen which has function options and press Left/Right button to select function. func menu After selecting a function, you can press the Up button to return to the Still Picture menu for other Photo Setup or Camera Setup pages.
Continuous AF Continuous Capture Setting When Continuous AF is turned on, the camera will continually adjust focus automatically in response to any camera or subject movement. Use this setting to perform continuous shooting. After entering this mode, you can shoot multiple images by continuously holding the shutter button down. There are two options: There are two options: • Off • On • Cont.Shot: Off Turn off the Continuous Shot function. • Cont.Shot: On Shoot at the rate of 2.
Focus Setting Image Color Setting This setting allows you to select different modes for optimum focus. Image color setting allows you to select different color effects. Image color setting effect has the following 4 options: • Normal Single-AF • Vivid Multi-AF • Retro • Black and White There are 2 options: Adjustable only in 40 Manual Mode.
White Balance Setting The White Balance Setting allows you to adjust the color temperature for different lighting sources to ensure accurate color reproduction. 1. Press Left/Right button to select the following 7 modes: • AWB • Daylight • Cloudy • Fluorescent • Fluorescent CWF • Incandescent • Manual WB (Press the Shutter button to detect WB) 2. Press the SET button to confirm the settings and exit the menu. Adjustable only in Manual Mode.
Setting Menu Quality Mode : Press func menu button to enter shooting menu. 1. Press Up/Down button to switch among shooting menus and select setting menu. The camera's quality setting adjusts the compression ratio of the images. Higher quality settings produce better quality photos, but will take up more memory space. There are three options for picture quality: 2. Press SET or Right button to set menu.
AF-Assist Beam Digital Zoom This option can turn on or turn off the AF assist lamp. The AF assist beam is useful for focusing in the dark or in low lighting conditions. Use this setting to enable or disable the Digital Zoom function. When Digital Zoom is turned off, only the optical zoom is functional.
Date Imprint Quick Review Include a Date/Time stamp in the photo image. This setting refers to the brief photo review immediately after taking a picture. The picture stays on the LCD screen for an adjustable period of time.
Movie Mode Menu Image Pixel Mode : Press mode dial to select 1. Press func menu mode. button to enter The quality of photos can be changed by selecting image resolution ratio. menu. The speed requirements for reading and writing high resolution pixel images to a SD card are as follows: 2. Press Up/Down button to select the menu options to be set. 3. Press Left/Right button to select functions. No.
Playback Menu Protect Mode : In Playback mode, press the Playback menu. func menu button to enter the To prevent any pictures or videos from being accidentally erased, use this setting to lock one or all of the files. 1. Press Up / Down button to switch between playback menus. 2. Press SET or Right button to playback setting menu. To protect/unprotect a picture or video: Please refer to the following sections for detailed instructions on the various menu options. 46 1.
2. Press Up/Down button to select between protection options: Delete There are two ways to delete files. • Single, to protect a single selected photo or video • All, to protect all photos and videos stored in built-in memory and/or SD card Press SET button to confirm and enter photo/video protection interface. 3. Select Protect to lock displayed photos or videos, or select Unprotect to unlock, then press SET and select "Back" to return to the playback menu. • Delete One: 1.
• Delete All: 1. In the Delete option, select All and then press the SET button. 2. Use Up/Down button and select Delete All to delete all files, or select Exit to return to the menu. The “ ” indicator means a file is protected. File protection must be removed first before a file can be deleted. Deleting files will cause DPOF settings to be reset.
Trim Red-Eye Reduction The Trim setting allows you to trim an area of a selected photo and save it as a new photo. To trim a picture: 1. Select cutting function. Use this setting to remove red eye in your photos. 1. In the playback mode, press Left/Right button to select the photo which needs red-eye reduction. func menu, select to set, press SET to enter 2. In the menu setting screen. 3. Press Left/Right button to select corresponding menu, or cancel and return playback menu. 2.
Rotate You can use this setting to change the orientation of the picture. 1. In the playback mode, press Left/Right button to select the photo which needs rotation. func 2. In the menu menu, select to set, press SET to enter setting screen. 3. Press Left/Right button to select rotation direction, or cancel and return play menu. Slideshow This setting allows you to view all the stored pictures as a slideshow. 1. Press button to enter playback screen. 2. Press SET button to enter slide option. 3.
Setup Menu Mode : You can enter the Setup menu from any mode, just press button, press Up/Down button to switch, select setting menu, press SET button to enter, then press Up/Down button to select basic setting menu. func menu 2. Switch between different functions with the Up/Down button. 3. Press the SET or Right button to enter the submenu. After selecting a function option, you can press the Up button to return to the menu for other Camera Setup pages.
2. Press Up/Down button to select volume control: • Tone 1: Low • Tone 2: Medium • Tone 3: High Power Saver This setting allows you to save power and get the maximum possible running time for your batteries. Follow the steps below to turn off the LCD screen and camera automatically after a period of inactivity. 1. Select the Power Save setting from the Setup menu as described previously. 2. Press the Up/Down button to select the power items for the screen and camera and press the Right button. 3.
Zone The Zone setting is a useful function on your overseas trips. This feature enables you to display the local time on the LCD screen while you are overseas. 1. Select the Zone setting from the Setup menu as described previously. The world time screen will appear. 2. Use the Up/Down navigation buttons to switch between the hometown ( ) and travel destination ( ) fields. 3. Use the Left/Right navigation buttons to select a city close to the desired time zone. Then press the SET button to confirm.
Copy to Card (Copy internal memory to SD memory card) Use this setting to copy the files stored in the camera's internal memory to an SD memory card. 1. Select Copy to Card in the File/Software menu, then press Right. 2. Use the Up/Down navigation buttons to select Yes or No. Then press the SET button to confirm the setting. If there is no card available in the camera, this function will not be displayed.
Reset Settings FW Version (Firmware Version) Use this setting to restore the camera to its original factory default settings. Use this setting to view the current camera firmware version. 1. Select Reset Settings in the File/Software menu, then press Right. Select FW Version in the File/Software menu, then press Right. 2. Use the Up/Down navigation buttons to select Yes or No. Then press the SET button to confirm the setting.
Transmission Connecting to a PC You can use a USB cable to connect the camera and copy (transmit) photos to a computer, printer or other device. Setting the USB mode The camera’s USB port can be set to connect with either a PC or a Printer, the following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1. Go to the Transmission menu, then select USB connection with the Up/Down button, and press the Right button. 2. Use the Up/Down navigation buttons to select PC.
Windows operating system (Windows 2000, Windows XP, Windows Vista, Windows 7). Click the [Safely remove the hardware] icon and remove the USB connector according to the appeared menu. 4. Disconnect the camera once transfer is completed. Macintosh Drag the untitled icon to the Trash. ("Untitled") If the USB option is set to [PC] : Turn the camera off and disconnect the USB cable.
Connecting to a PictBridge Compatible Printer PictBridge allows printing images from a memory card in a digital camera directly to a printer, regardless of brand. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the printer manual. With the PictBridge function on your camera, you can print the captured photos directly with a PictBridge compatible printer using the supplied USB cable, without the need for a PC. 3.
Connecting the Camera and Printer. 1. Make sure both the camera and printer are turned on. If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD screen. 2. Connect one end of the supplied USB cable to the USB port on your camera. 3. Connect the other end of the cable to the USB port on the printer.
Video System Use this feature to switch the video system from either NTSC or PAL. 1. Select Video System in the Transmission menu, then press Right. 2. Use the Up/Down navigation buttons to select NTSC or PAL. Then press the SET button to confirm. 60 The video output signal can be switched to NTSC or PAL to accommodate different regional TV standards. The appropriate setting will vary between regions. NTSC: USA, Canada, Taiwan, Japan, etc. PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
Using the PictBridge Menu After setting the USB mode to Printer, the PictBridge menu will appear: Print with Date If you have set the date and time of your camera, the date and time will be recorded and saved with each photo you take. 1. Select Print with date from the PictBridge menu. The following screen will appear: Press the Up/Down button to select a menu item, then Press the SET or Right button to enter this item. Refer to the following sections for more detailed information on each setting. 2.
3. Use the Up/Down navigation buttons to select the number of prints for the current displayed photo. Print without Date 4. Press the SET button and the following screen will appear: 1. Select Print without date from the PictBridge menu. The following screen will appear: 5. Select “Yes”, then press SET button: confirm print. Select “Cancel”, then press SET button: cancel print. Use this setting to print the photos without dates on them. 2.
Print Index You can use this setting to print all indexes to show all photos currently in your camera. 1. Select Print index from the PictBridge menu. The following screen will appear: 5. Select “Yes”, then press SET button: confirm print. Select “Cancel”, then press SET button: cancel print. 2. Select “Yes”, then press SET button: confirm print. Select “Cancel”, then press SET button: cancel print.
Print DPOF (Digital Print Order Format) Exit To use DPOF printing, you must select the photos for printing using the DPOF settings before hand. See the “DPOF” section on page 48. To exit the PictBridge menu, select Exit. The “Remove USB cable” message will be displayed. 1. Select Print DPOF from the PictBridge menu. The following screen will appear: Disconnect the USB cable from the camera and printer. 2. Select “Yes”, then press SET button: confirm print.
APPENDICES Specifications Design and specifications are subject to change without notice. Active Image Sensor Pixels 16.15 Megapixels Total Image Sensor Pixels 16.44 Megapixels [1/2.3"CCD] Lens Focal Length 4.9mm (Wide) — 19.6mm (Tele) [35mm film equivalent] [27mm (Wide) — 108mm (Tele)] F number F3.0 (Wide) — F6.6 (Tele) Lens Construction 7 groups 7 elements Optical Zoom 4x Focusing Range Normal: (Wide) 23.6in. ~ ∞ / 60cm ~ ∞ (Tele) 39.3in. ~ ∞ / 100cm ~ ∞ Macro: 1.9in.
Number of Recording Pixels Movie 720p30, 720p15, VGA, QVGA Image Compression Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format 66 Still Image (4:3) 16MP: 4608×3456, 10MP: 3648×2736, 5MP: 2592×1944, 3MP: 2048×1536, 0.3MP: 640×480 (3:2) 12MP: 4608×3072, (16:9) 10MP:4608×2592 2MP: 1920×1080 Still Image Exif 2.3 (JPEG) Movie Movie Format: MOV (Motion JPEG), Audio: G7.
LCD Display 2.7inch (230k Pixels) ISO Sensitivity Auto, ISO 80/100/200/400/800/1600 AF Method Single AF, Multi-AF (TTL 9-point), Face-Detection Exposure Metering Method Artificial Intelligence AE (AiAE), Face AE Exposure Control Method Program AE (AE-Lock Available) Exposure Compensation ±2EV in 1/3 Step Increments Shutter Speed 1/2000 ~ 4 Seconds Continuous Shooting Yes Playback Modes White Balance Control Single Photo, Index (9/16 Thumbnails), Slide Show, Zoom (Approx.
Flash Flash Method Internal Flash Modes Auto, Red-Eye Reduction, Forced Flash, No Flash, Slow Synchro, Red-Eye Reduction + Slow Synchro Shooting Range (Wide) Approx. 11.8in. ~ 204.7in. / 0.3m ~ 5.2m (ISO800) (Tele) Approx. 19.6in. ~ 94.4in. / 0.5m ~ 2.4m (ISO800) Recording Media SD/SDHC Card (Up to 32GB Support) [Nonsupport MMC Card] Other Features PictBridge, ExifPrint Support, Multi-Language Support (25 Languages) Jacks AV-OUT/USB 2.
Error Messages Messages Explanation Card error • The memory card is not formatted. Card full • The memory card is full and cannot store any new images. Exceeded maximum folder number. • This indicates that the SD card exceeded the maximum number of folders (999). This could cause a long read time during the camera's power up.Copy the data to your PC, format the memory card using the camera. Picture error • The picture was not captured correctly. • The picture is corrupted.
Messages Explanation Card is not formatted, format? • Confirm whether the memory card should be formatted. This image cannot be deleted • The picture or video you are trying to delete is protected. Warning!! Camera recording, please wait. • No other actions allowed to perform during video/audio recording. Warning!! Battery exhausted. • The battery is out of charge. This file cannot be played back • The picture format cannot be recognized by the camera.
Troubleshooting Problem Camera does not turn on. Camera turns off suddenly during operation. The picture is blurred. Possible causes • The battery has run out. Solution • Replace with a fully charged battery. • The battery is not inserted correctly. • The battery has run out. • Replace with a fully charged battery. • The lens is dirty. • appears when taking pictures. Images and video files cannot be saved. • The memory card is full. No picture is taken when pressing the Shutter button.
Problem Images cannot print from the connected printer. Possible causes • The camera is not connected to the printer correctly. Solution • Check the connection between the camera and printer. • The printer is not PictBridge compatible. • Use a PictBridge compatible printer. • The printer is out of paper or out of ink. • Replace the ink cartridge in the printer. • The paper is jammed. Writing to memory card is slow Cannot write to the memory card 72 • Load some paper in the printer.
http://www.ge.
