Owner's manual

Aboutthe dryerfeatures.

Stainless Steel Drum (onsomemodels)

Tile stainless steel used to make tile

(h_'er dram provides the highest reliabili F

available in a GE dr)/e_: If tile d_yer drtun

should be scratched or dented dm_Jng

nomml use, tile drum will not rust or

corrode. These surfl_ce blemishes will

not aftect tile flmcfion or durabiliP,' ot

tile drum.

Aboutreversingthe door.

Reversing the Door

Toolsneeded.

• Standard#2

Phillipsscrewdriver

• Tape-tipped

putty knife

_] Open tile door and remove tile filler plugs opposite tile hinges. X_ith tile door

completel) open, remoxe tile bottom screw from each hinge on tile dr)er face.

Insert these screws about half wax into the TOP holes, for each hinge, on the

opposite side (where)ou relnoxed tile filler I)lu_'s_/ Apply firln i)ressure to _oet

tile screw started in new holes.

[_ I,oosen top screw from each hinge on tile dryer thce half way. X_ith one hand

holding tile top of tile door and tile other hand holding tile bottom, rellloxe

tile door from tile d_wer b) lifting it UP and OUT

[_] Rotate tile door 180? Insert it on tile opposite side of tile opening b) moxing

the door INand DOWN until the toi ) hinge, and the bottom hinge" are resting

on tile top screws inserted in step 1.

[_ Remove tile remaining screws from tile side of tile opening from which tile door

was remoxed. X,_ith these screws secure each hinge at the bottom. Tighten the

two top screws of each hinge Reinsert tile plastic I)lu°s_' on tile side fl'om which

tile door WaS reillOxe(l.