Owner's manual

Beforeyoucall forservice...
Problem Possible Causes What ToDo
Clothes take too long Improper sorting * Separate heavv items ti'om lightweight items (generally,
to dry a well-sorted washer load is a well-sorted d_Ter load),
Large loads of heavy fabrics I,arge, heavv rid)tics contain more moisture and take
(like beach towels) hmger to (hy: Separate large, heavy lid)tics into smaller
loads to speed (hying time.
Controls hnproperly set Match control settings to the load you are (hTing.
Lint filter is full Clean lint filter before every load.
hnproper or obslructed
ducthlg
Check installation instructions fin" proper
ducting/venting.
Make sm'e ducting is clean, fl'ee of kinks and
tmobstructed.
Check to see if outside wall damper operates easily.
Check the Installation Insmmtions to make sure the
(h3'er venting is correct.
Blown fuses or tripped Replace fllses or reset circuit breakex_. Since most (h_'ex_
circuit breaker use 2 fllses/breake_, make sm'e both are operating.
OverloadJng/combhlh_g loads Do not put more than one washer load in the drxer at
a time.
Underloadh_g If you are dr)ing only one or two items, add a tew items
to ensm'e proper rambling.
Clothes are wrinkled Overdryh_g Select a shorter drying time.
Remove items while they still hold a slight am(rant ot
moistm'e. Select a LESSORYor DAMPDRY setting.
Letting items sit in dryer Remme items when cycle ends and fold or hang
after cycle ends immediately.
Overloadh:lg Separate large loads into smaller ones.
Clothesshrink Some fabrics will naturally shrink To axoid shrinkage, fi)llow gam_ent care labels exactly.
when washed. Others cma be Some items may be pressed back into shape aDer (hTing.
safely washed, but will shrink
in the dryer If you are concerned about shrinkage in a particular
item, do not machine wash or ramble dry it.
/2