Manual

49-2000646 Rev. 0 17
Settings
Settings allow to change the default settings of your OTR.
1. Press the Settings pad. “SELECT SETTING ITEM
1- CLOCK SETTING
2- CLOCK MODE
3- BEEPER VOLUME
4- LIGHT SYNC
5- VENT FAN SYNC
6- SYNC SUTO OFF
7- TURN TABLE
8- DISPLAY SETTING
9- REMOTE ENABLE
0- EXIT
2. Select the item to change the settings. See below tables for
detail Guide
Settings
Code Entry Items for setting Level Entry
1 CLOCK Setting Entry valid number for setting clock time
2 Clock Mode 0 - 12 hours
1 - 24 hours
Default is 12 hours
3 Beeper Volume 0 - Mute
1 - Low
2 - Normal
3 - Loud
Default is normal
4 Chef Connect Feature: Light Sync - Selects the light level at which the surface
lights will automatically turn on when paired range’s burner is turned on. Select
“Off” to disable this feature. Surface light will turn on manually.
0 - Off
1 - Low
2 - High
Default is High
5 Chef Connect Feature: Vent Fan Sync - Selects the fan speed at which the vent
fan will automotically turn on when paired range’s burner is turned on. Select
“Off” to disable this feature. Vent fan will turn on manually.
0 - Off
1 - Low
2 - Medium
3 - High
4 - Boost
Default is OFF
6 Chef Connect Feature: Sync Auto Off - When the Light/Vent fan sync mode
is enabled (ON), this will automatically turn OFF the light/fan when the range
burner has been turned off. Select the period of time the light/fan will remain on
until the microwave automatically turns it off.
0 - 0 minutes
1 - 5 mintues
2 - 10 minutes
3 - 15 minutes
4 - Manual
Default is 15 minutes
7 Turntable On/Off 0 - OFF
1 - ON
default setting is ON"
8 Display Setting DISPLAY:
1 - DISPLAY ON/OFF :
0 - OFF
1 - ON
2 - SCROLL SPEED :
1 - SLOW
2 - NORMAL
3 - FAST
3 - SLEEP DELAY:
1 - 5 SEC
2 - 10 SEC
3 - 30 SEC
9 Remote Enable: Remote Enable On/Off feature could enable you to start the
microwave from a remote source or avoid you unintendedly to control your
microwave remotely. For turn on/off this feature please press “Settings” button
on the control panel then press “9” to select this feature then press “1” for On
and “0” for Off function.
0-OFF
1-ON
Default is On
0 Setting Exit 0 - EXIT
Other Features
USING YOUR OVEN