Installation guide

Installation Instructions

OUTSIDE TOP EXHAUST (Vertical Duct)

INSTALLATION OVERVIEW

A1. Attach Mom_ting Plate to _\'all

A2. Prepare Top Cabinet

A3. Check Damper Operation

A4, Mom_t Microwave Oven

AS, A_!just Exhaust Adaptor

A6, Connect Ductwork

I-_ ATTACH THE MOUNTING

PLATE TO THE WALL

Attach the plate to the wall using toggle bolts.

At least one wood screw illtlSt be used to attach

the plate to a wall stud.

_ Remove tile toggle wings from tile bolts.

_ Insert the bolts into the mounting plate

through the holes designated to go into drywall

and reatmch the toggle wings to '_A"onto each bolt.

To use toggle bolts:

Mounting

Plate _,

Spacingfor Toggles

MoreThanWall

÷l_.-i.._Th ckness

ToggleWings

B01tEnd

[]Place tile mounting plate against tile wall and

insert the toggle wings into the holes in the wall

to mount tile plate.

NOTE: Before tightening toggle bolts and wood

scre_, make StlYe tile tabs on tile mounting plate

touch tile bottom of tile cabinet when pushed

flush against the wall and that the plate is properly

centered under tile cabinet.

CAUTION: Be careflfl to axoid Ilinchin'*_ fingers

between tile back of tile mo/mting plate and tile wall.

_ Tighten all bolts. Pull the plate awm from the wall

to help tighten the bolts.