Installation guide

Installation Instructions

[_ DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET

Plate position - beneath flat bottom

cabinet

Plate position - beneath framed recessed

cabinet bottom

MountingPlateTobs

Touchingthe CGbinet

Bottom

At leost 30", up to 36"

Mounting Plate Tabs

Touching the Bock

Frome

Plate position - beneath recessed bottom

cabinet with front overhang

Mounting Plote

with TabsBelow

CabinetBottom

the SameDistonce

os the Front

OverhGngDepth

Your cabinets may have decorative trim that interferes

with the oven installation. Remove the decorative trim

to install the oven properly and to make it level.

THE OVEN MUST BELEVEL.

Use a level to make sure the cabinet bottom is level.

If the cabinets have a front overhang only, with no back

or side frame, install the mounting plate down the same

distance as the front overhang depth. This will keep

the oven level.

[_ Measure the inside depth of the front overhang.

[_ Draw a horizontal line on the back wall an equal

distance below the cabinet bottom as the inside depth

of the front overhang.

[_ For this type of installation with front overhang only,

align the mounting tabs with this horizontal line, not

touching the cabinet bottom as described in Step D.

30" to Cooktop