Installation guide

Installation Instructions
_ MOUNT THE OVEN (continued)
[_ Attach the oven to the top cabinet.
[_ Insert 3 self-aligning screws
(¼"-28 x 2 S/s")through outer
top cabinet holes. Turn two full
turns on each screw.
Cabinet Front
Cabinet Bottom Shelf
FillerBlock
._E ° _, This distance
quivalent |can NOT
o depth | exceed 2" to
f cabinet | ensure proper
_installation
-- Self-Aligning Screw
Oven Top
[] Tighten the outer two screws to the top of the oven.
(While tightening screws, hold the oven in place
against the wall and the top cabinet.)
,/
..............................................................................................111 i _],
[_ Install grease filters. Seethe Owner's Manual
packed with the oven.
_=5] ADJUST THE EXHAUST ADAPTOR
Open the top cabinet and adjust the exhaust adaptor
to connect to the house duct.
Damper
i ,_
_q - Backof
i_J _ _ L.3_/_ ,Oven
_6] CONNECTING DUCTWORK
House Duct
[_ Extend the house duct down to connect to
the exhaust adaptor.
[_ Seal exhaust duct joints using duct tape.
14