Installation guide

14 31-2000354 Rev. 0

Installation Instructions

INSTALL MOUNTING SCREWS

• Slide the oven the remaining way into the

opening so that the side flanges and control

panel are against the cabinet frame. Make sure

that the oven is centered in the opening.

• Open the door, place a turntable tray in the oven

and make sure that the tray in the unit is level.

• Drill pilot holes through the side flanges.

• Drive the color-matched screws into the side

flanges. It is recommended that the screws

be hand tightened.

If installing oven with an accessory storage

drawer:

• Open the drawer.

• Drill pilot holes through the side flanges.

• Drive color-matched screws into the side flanges.

It is recommended that the screws be hand

tightened.

FINALIZE INSTALLATION

• Turn power on at the source. The interior light should

come on when the door is opened.

• Refer to Owner’s Manual for operating instructions.