Specification

CSB48WSK
GE Café
™
Series 48" Built-In Side-By-Side Refrigerator
Specification Revised 10/15
For answers to your Monogram, GE Profile
™
Series
or GE
®
Series appliance questions, visit our website
at geappliances.com or call GE Answer Center
®
service, 800.626.2000.
Total volume and shelf
area are calculated by
the Association of Home
Appliance Manufacturers’
standards.
Listed by
Underwriters
Laboratories
* Shipping height
* The front height may be adjusted from
83-1/2" to 84-1/2" by adjusting front and
rear leveling legs a maximum of 1".
PRODUCT CLEARANCES
These refrigerators are equipped with a 2-position
door stop. The factory set 130° door swing can be
adjusted to 90° if clearance to adjacent cabinets or
walls is restricted.
MODELS A B C D
48" 13-7/16" 18-9/16" 28" 4"
Allow minimum clearances for Freezer door
(Dimension A) and Fresh Food door (Dimension B)
for a full 130° door swing and to allow for drawer
removal.
Four inch (4") minimum clearance is required when
door swing is adjusted to 90°. If the 90° door stop
position is used, drawer access is maintained, but
drawer removal is restricted.
STAINLESS STEEL WRAPPED REFRIGERATORS
Stainless Steel wrapped refrigerators have wrapped
doors and grille panels, and beveled edges. These
models are shipped ready for installation.
DIMENSIONS AND INSTALLATION INFORMATION
48" FRAME-TO-FRAME
DEPTH INCLUDING
HANDLES 27"
47"
CASE WIDTH
25-3/8"
CASE DEPTH
*81-3/4"
AT REAR
*84" FROM
FLOOR TO
TOP FRAME
130° DOOR SWING 90° DOOR SWING
B
A
23-7/8"
BEHIND
FRAME
C
D
D