Instructions / Assembly

5




Install an approved junction box where it will be
easily reached through the front of the cabinet
where the cooktop will be located. The cooktop
conduit is 3 feet long.






Apply the foam tape around the outer edge of the
glass. Do not overlap the foam tape.
 On CP350S, PP912S, PP932S, PP942S, PP944S,
PP945S & PP950S models, apply the foam tape
around the outer edge of the glass on the sides and
rear of the unit only.



Remove the hold down brackets and screws from
the literature package.


Screw the hold down bracket to the side
of the cooktop unit. Repeat for opposite side of
cooktop.
Hold Down
Bracket
Pre-Drilled Hole
Bottom of Cooktop
Cooktop Glass
Foam Tape
Install junction box so that
it can be reached through
the front of the cabinet.
16”
Min.



Place a towel or tablecloth onto the countertop.
Lay the cooktop upside down onto the protected
surface.
Bottom of Cooktop
Cloth under Cooktop
Bottom of Cooktop
Foam Tape
Cooktop
Glass
Mounting Screw