Brochure

6 GE
Centrifugal & Axial Compressors
MCL compressors are designed in several sizes and pressure ratings to cover different applications.
The compressor casing is either cast (cast-iron, cast steel) or fabricated. The diaphragms are
cast-iron, cast steel or fabricated.
The impellers and diffusers are selected from a wide range of standard stages in accordance
with the application and desired performance.
The radial and thrust bearings are of the tilting pad type.
Shaft-end seals are mainly dry gas seals but can be labyrinths or oil film seals.
Inter-stage leakages are controlled by labyrinths (static or rotating) or abradable seals.
Double flow models (DMCL) are used to compress very high flows. This solution allows the casing
size and speed to remain within an acceptable range to couple the compressor to drivers and/or
other compressor casings.
Different washing options can be offered as required.
MCL / V series
Horizontally split VS compressor for refrigeration service
2MCL Horizontally split compressor being machined
MCL series