Data Sheet
Ordering Number Logic
C1S Conserva
™
150 (C1S)
C1S =
Conserva
150
Luminaire
PROD. ID
60Hz
0 = 120/208/
240/277
MULTIVOLT
1 = 120
2 = 208
3 = 240
4 = 277
5 = 480
D = 347
F =
120X347
T = 220
50Hz
6 = 220
Y = 240
G = 380
VOLTAGE
E = Energy
Act Compliant
Pulse MH
(EPMH)
S = HPS
K = Ceramic
MH
P = Pulse
Start MH
Note: Lamp is
vertical base
up. Lamp not
included.
LIGHT
SOURCE
See Ballast
Selection
Table
A = Autoreg
G = Mag-Reg
with
Grounded
Socket
Shell
H = HPF Reactor
or Lag
K = Hot Restart
M = Mag-Reg
BALLAST
TYPE
TA = Enclosed
Acrylic
See Ballast
and
Photometric
Selection
Tables
4 = 40
5 = 55
AMBIENT
°C
1 = Ceiling
(MPM-C)
2 = 3/4-in. Pendant,
Rigid (MPM-3PR)*
3 = 3/4-in. Pendant,
Rigid, Wet Locations
(MPM-3PRW)*
4 = 3/4-in. Pendant,
Rigid, with Thru
Feed, Wet Locations
(MPM-3PRTFW)*
5 = 3/4-in. Pendant,
Flexible (MPM-3PF)
6 = Outlet Box Cover
(MPM-OBC)
*NOTE: Flexible
pendant mounting
receptacle must be
used if unit is not rigidly
mounted or xture will
not hang straight
MOUNTING
RECEPTICAL
OPTICAL OPTIONS
B = Time Delay Automatically
Switch Quartz
F = Fusing
Q = Non-Time Delay
Automatically Switch Quartz
Note: Wet location determined
by mounting receptacle
WAT TAGE
07 = 70
10 = 100
15 = 150
(55V)
17 = 175
25 = 250
C1S TA
_ _ _ - _ _ - _ - _ - _ - _ - _ _ - _ - _
Photometric Selection Table
CIS
Wattage Light Maximum Spacing
Photometric
Source Ambient Criteria Curve
70* PMH 40C 1.6 452584
100* PMH 40C 1.7 452583
175 EPMH 40C 1.7 175836
175(COATED) EPMH 40C 1.9 175924
250 EPMH 40C 1.7 175836
250(COATED) EPMH 40C 1.9 175924
70* Ceramic MH 40C 1.6 452585
100* Ceramic MH 40C 1.7 452586
150* PMH 40C 1.6 452582
70,100 HPS 55C 1.8 175835
150(55V) HPS 55C 1.8 175835
250 HPS 40C 1.8 175842
* Medium base socket. (Lamp not included)
Note: C/F = Call Factory
Ballast Selection Table
NOTE: N/A = Not Available
* Medium base socket (Lamp not included)
** 480 Volt not available
CANADIAN NOTES:
1. “A” ,Autoreg, and “H”, HPF available 120, 277 or 347 volts only
2. 208, 240, and 480 volts require CWI ballast. Use “G” when
available. Contact factory for all others.
3. Multivolt not available.
4. “K” Hot Restart not available.
5. 208, 240 and 480 volts with “G” ballast not available with
switched quartz.
Ballast Type / Voltage
60HZ 50HZ
120, 208 120
Light 240, 277 x
Wattage Source Multivolt 480 347 347 220 220 230 240 380
70 HPS H,K G,H**,K,M G,H,K H,K N/A N/A M N/A N/A
100 HPS H,K G,H**,K,M G,H,K H,K N/A H,M H,M H N/A
150(55V) HPS H,K G,H**,K,M G,H,K H,K A,M H H H N/A
250 HPS A A A A N/A H H,A H,A N/A
70* Cer, MH H H H N/A N/A N/A N/A N/A N/A
100* Cer, MH H H H N/A N/A N/A N/A N/A N/A
70* MH H H H N/A N/A N/A N/A N/A N/A
100* MH H H H N/A N/A N/A N/A N/A N/A
PULSE START METAL HALIDE LIGHT SOURCE
BALLAST SELECTION TABLE
150* P (MH) N/A H** H N/A N/A N/A N/A N/A N/A
175 EPMH N/A A A A N/A N/A N/A N/A N/A
250 EPMH A A A A N/A N/A N/A N/A N/A