Installation Guide

Ceiling Mounting Method Options
Wiring Diagram
CAUTION
Use mounting options that are appropriate for use with your mounting surface and weight of the xture.
Description:
Mount xture directly to building structural
member such as:
• Bar joists, strut, purlins, beams roof trusses, etc.
Equipment Required (not supplied):
• 1/4”-20 or M6 threaded rod
• Contact supplier for other options
Description:
Mount xture to ceiling canopies (not supplied).
Equipment Required (not supplied):
• Suspension cable
• Single-feed Canopy Kit (67654)
• Contact supplier for other options
Black
AC
White
Green/Yellow
Grey
Violet
Violet/White
Black/White
Blue/White
Yellow
Line
Neutral
Ground
1-10V(-)
1-10V(+) DALI/PROG.
DALI/PROG.
LED Driver
Remote
Switch
(Optional)
Mount to Building Structure
Mount to Ceiling Canopy
OPTION 1
OPTION 2
NOTE:
• Use appropriate connectors to make
connections in accordance to local electric
code of the country where the luminaire is
installed as described in BL Series Lumination
LED Luminaires Installation Guide instructions
provided with the luminaire.
• UL Listed conduit connections and ttings per
NEC/CEC.
• When connecting to (optional) switch, run wires
from controller or dimmer through a different
knockout than the AC input wire. Follow lighting
controller installation instructions.