Installation Guide

Wiring for Lutron Controller
Lutron
dimming wires
3
Optional: If using a dimmer, connect black and red
wires of the dimming line to the PSU dimming wires
with twist-on connectors. Use the appropriate wires
for your dimming type according to diagrams below.
4
Replace cover using at least one star washer under
countersunk screw head.
Star washer
1 2
Connect the AC line to the black (line) and to the
two white (neutral) input wires of the LED Driver
using 18-14 AWG (0.82-2.08 mm
2
) twist-on wire
connectors. Connect AC line green ground wire to
Troffer ground wire using twist-on connectors.
For Lutron dimming, connect black and red wires
of the dimming line to the two purple Lutron
dimming wires with twist-on connectors.
Electrical Connections
1
Remove knockout closure to insert AC line.
Optionally, remove both knockout closures if
installing a dimming line.
2
Connect the AC line to the black (line) and white
(neutral) input wires of the LED Driver using 18-14
AWG (0.82-2.08 mm
2
) twist-on wire connectors.
Connect AC line green ground wire to Troffer
ground wire using twist-on connectors.
Dimming line
(optional)
AC line
AC line