Installation Guide

Leader cable to LED xture
Black (+)
White (-)
120-277V
AC Line
Electrical Connections
Connect the leader cable to the male plug on the
rst LED xture. Two clicking noises should be
heard.
Continue placing xtures, being sure to join
plugs male to female. Attach jumper cables as
needed to work around any obstacles, corners or
separations.
Connect the black (line) and white (neutral) wires
of the AC line to the similarly colored wires of the
leader cable using wire nuts.
Remove endcap from other side.
Place end cap from Step 4 on the electrical plug of
the last xture in the run.
Wiring diagram.
3
5
7
4
6
8
Orient plugs male to female
AC line
Leader cable
WARNING
The electrical supply for each luminaire must
always be connected to the male connector.