Installation Guide
1 1
2 2
3 3
4
5
6
7
6
7
Wire stripper/cutter
Screwdriver
Cordless drill with driver bit
GE LED Batten xtures
Leader cable (96440)
GE plastic mounting clips (96442)
#10 (M5) self-tapping athead screws
UL approved 18-14 AWG (0.82-2.08 mm
2
) wire
connectors or in-line splice connectors
End cap for connectors
Optional: Jumper cable (96441: 24 in./610 mm long)
Tools Required Components Required
3
3 4 5
21
1
Installation
2
Assemble the LED xture by pressing both mounting
clips onto the LED Batten. A snapping noise should
be heard. Refer to Specications table on page 4 for
required number of mounting clips.
Mount the xture to the desired ceiling/wall using
two #10 (M5) self-tapping athead screws in each
mounting bracket.
1 2