User Manual

AZ45E12DBM
GE Zoneline
®
Cooling and Electric Heat Unit with Makeup Air, 230/208 Volt
Specification Revised 4/18
FEATURE AND BENEFITS
Product built to order, lead times may vary
Makeup air – Delivers 25-50 CFM of continuous makeup air whenever
the room is occupied
Energy efficiency – When paired with occupancy sensing hardware,
ventilation can be halted during vacancy
Dehumidification – Dehumidifies at a rate of 5-6 pints per 24 hours
(based on CFM level)
Heat & Freeze Sentinels – Keeps the room from overheating or freezing
Electronic temperature limiting – Prevents expensive over-cooling or
over-heating of the room
Electronic touch controls with LED display
May reduce the need for individually ducted rooftop systems
Because makeup air increases room BTU load requirements and requires
additional PTAC cooling or heating, the building’s electrical needs may
be impacted
Makeup air models are not recommended for installation within two
miles of coastal areas
It is strongly recommended to install makeup air with wall thermostats
SMC base pan
Simplified structure – Easy to maintain and service