Room Air Conditioner Accessories Guide

10
RAK201
(AZC and AZ Series*)
Access Plate Cover
The RAK201 access plate cover is made of heavy-gauge steel with
multiple knockouts for special applications. Will adapt to service
conduit .875" or 1.125"; circuit breaker up to 30 amp or 30 amp
receptacle. The RAK201 fits old sub-bases RAK120, RAK121 and
RAK122 for easy replacement of A-B series with AZC and AZ series.
RAK7022
(AZ Series*—22, 25, 28, 29, 32, 35, 38, 39, 41 and 61 only)
Duct Transition for Replacement of AZC with Rounded-Front AZ Chassis
The RAK7022 duct transition is designed to allow duct installation where the
original chassis was a slope-front discharge (AZC/AZR/AZ21/AZ31) chassis.
Using the RAK7022 will allow the existing duct adapter and extension to
be used without requiring the relocation of the hole through the wall to the
adjacent room.
RAK7012
(AZ Series*—22, 25, 32, 35, 28, 29, 38, 39, 41 and 61)
Duct Adapter for Replacement of A_B with Rounded-Front AZ Chassis
The RAK7012 duct adapter is designed to line up with the duct extension
where the original chassis was a flat-top discharge A-B Series. Using the
RAK7012 will allow the existing duct extension to be used without requiring
the relocation of the hole through the wall to the adjacent room. Discharge
grille, end plate and extension mounting hardware must be removed from
old duct adapter and installed on the RAK7012.
8-3/8"
6-1/2"
ZONELINE
®
UNITS
* A_B Series: Zoneline units built before 1987 – Zoneline I, II , III , and IV; AZC Series: Zoneline units built from 1987 to 1992 – includes AZR Series – Zoneline 1000, 2000, 2500, 2700, 3000,
4000, 5000; AZ Series: Zoneline units built after 1992 – Zoneline 21, 31, 26, 51 / Zoneline 22, 32, 52 / Zoneline 25, 35, 55 / Zoneline 28, 29, 38, 39, 41, 58, 61, 75, 85.