Room Air Conditioners Manual

On
Cool
Timer Temp
Off
On
Mode
Power
On/Off
Off
Fan
Fan
Hi
Heat
Low
Air Conditioner Controls
1. ON/OFF
Turns air conditioner on and off.
2. Display
Displays the temperature setting. Displays hours when
setting the timer.
3. MODE
On the air conditioner controls, use to set COOL, HEAT or
FAN mode. Indicator lights on the air conditioner controls
will show the mode selected.
4. TEMP Increase + /Decrease – Pads
Use to set temperature when in COOL or HEAT mode.
5. FAN Speeds
Use to set the fan speed at LOW or HIGH. Indicator lights
will show the speed selected.
6.
TIMER
21³When the air conditioner is off, it can be set to
automatically turn on in half an hour to 24 hours at its
previous setting. Each touch will set the time in half hours
up to 10 and then in hours up to 24.
To cancel the On Timer, press the ON pad until “CL”
appears. Then wait until the display turns off.
2))³When the air conditioner is on, it can be set to
automatically turn off in half an hour to 24 hours. Each
touch will set the time in half hours up to 10 and then in
hours up to 24.
To cancel the Off Timer, press the OFF pad until “CL”
appears and wait for the set temperature to be displayed.
The unit will now resume normal operation.
7. Remote Control Signal Receiver
NOTE: When the air conditioner is turned on, it will
automatically start in the setting last used.
To ensure proper operation, aim the remote control at the
signal receiver on the air conditioner.
The remote control signal has a range of up to 21 feet.
Make sure nothing is between the air conditioner and the
remote control that could block the signal.
0DNHVXUHEDWWHULHVDUHIUHVKDQGLQVWDOOHGFRUUHFWO\³VHH
the Care and Cleaning section.
Remote Control
$ERXWWKHFRQWUROVRQWKHDLUFRQGLWLRQHU³+HDW&RRO0RGHOV
Appearance may vary.
Remote Control
Lights beside the touch pads on the air conditioner
control panel indicate the selected settings.
Controls
6