Room Air Conditioner Accessories Guide

RAF622 (while quantities last)

Replacement Room Front for Rounded-Front “J” Chassis

(1997–2000)

Used as replacement grille for rounded-front “J” chassis units. (Not for

use with high-mount units.)

RAG14E

Architectural Louvered Exterior Grille for “J” Series

Extruded aluminum grille for application with RAB46A, 47A, 48A and 48B.

NOTE: The RAG14E exterior grille is NOT compatible with the RAD4A1

EXTERNAL drain tube. Use of this grille would require the use of the

INTERNAL TUBE configuration to drain the unit.

RAG13A

Stamped Aluminum Exterior Grille “J” Series

Used to replace exterior grille on old “J” wall case to maximize efficiency

and capacity of new chassis. The grille is included with new wall cases

RAB46A, 47A, 48A and 48B.

RAF622A

Replacement Room Front for Rounded-Front “J” Chassis for A, B

and C Series and D Series ending in “1” or “2” (2001–2011)

Replacement room front for “J” series chassis with oval control

pushbutton opening. (Not for use on high-mount models.)

RAF822

Replacement Room Front for “D” Series ending in “5” and “E”

Series Rounded-Front “J” Series (2011–present)

Replacement room front for “J” series chassis with oval control

pushbutton opening. (Not for use on high-mount models.)

RAK690

Architectural Louver Grille Adapter for “J” Chassis Units

Permits most existing architectural louvered grilles to be used with “J”

chassis units. Kit consists of two wire mesh screen sections, clips to

attach screen to existing wall case and two aluminum air deflectors to

be mounted to new chassis.

BUILT-IN UNITS