Installation Guide

1
3 4
2
Loosen screws to remove endcap.
Connect AC line to xture’s power supply using UL listed
wire connectors. Green to green (ground), red to black
(line) and black to white (neutral).
Re-attach endcap.
A) Install 1/2” conduit, or B) install AC power cord with
strain relief.
A) Conduit B) Power cord
Electrical Connections (347/480V)
Optional Mounting Methods
1 2
Attach two rod mount brackets to xture using four
10-32 x 3/8” pan head screws per bracket.
Secure 1/2” threaded rods into structural members in
ceiling. Place a nut on each threaded rod where xture
should hang. Slide xture onto threaded rods and tighten
second nut onto rods to secure xture.
Rod Mount Kit
OPTION A
Attach to
structural member
Fasten with nuts