Technical Specifications

W-330 Performance Specifications
© 2014 General Electric Company. All rights resvered.
GEA31211 (07/2014)
GE Oil & Gas
16250 Port Northwest
Houston TX 77041
[phone]
24/7 customer support: [phone]
geoilandgas.com
Model 8W-330 10W-330 12W-330 16W-330
Rated HP
at 100º F
(38º C)
4600 5800 7000 9300
Fuel rate
Btu/bhp·h
6500 6500 6500 6500
Bore
18” 18” 18” 18”
Stroke
20” 20” 20” 20”
Max. rod
load
150,000 lb 150,000 lb 150,000 lb 150,000 lb
Max. comp.
cylinders
4 5 6 8
• 0.5 g/bhp·h NOx
• 2.0 g/bhp·h CO*
• 0.7 g/bhp·h VOC*
• 0.5 g/bhp·h CH
2
O*
• Speed (rpm) 264 to 330
• Torque (%) 70 to 100
• Ambient (° F) 100
• Fully NSPS Compliant
*Pre-Catalyst Emissions
• Improved Stability and Reliability
• Precise Control of the
Pre-Chamber Air Fuel Ratio
• Reduced Volume/PCC NOx
Contribution
• Eliminates PCC Check
Valve Cleaning
New Pre-Combustion Chamber
and ePCC
• Single Center-Mounted PCC
• PCC Indirectly Cooled
• Side-Mounted Sparkplug
• Better Flame Propagation
• Reduced Crevice Volume
New Head Design
Electronic Controls
• TER Based Air-Fuel Ratio
• Wider Operating Range
• Turbocharger Monitoring
• Data Trending
Transmission Compressor Cylinders
CCGT-20
MWP: 1450 psig
Liner Dia. Range: 13" to 16"
(330 mm to 406 mm)
CDGTA-20
MWP: 1450 psig
Liner Dia. Range: 16" to 19"
(406 mm to 483 mm)
CEGTA-20
MWP: 1350 psig
Liner Dia. Range: 19" to 23"
(483 mm to 584 mm)
Improved Control and Reduced Maintenance
Optimized Combustion
Fewer Operational Excursions
Proven Performance and Reliability