Quick Start Guide

ManualsBrandsGE ManualsElectrical EquipmentTunable White Direct Connect Smart Bulb

Direct Connect

Quick Start Guide

Screw or plug in your smart lights

and power them on.

Download the C by GE app.

Voila! You can now enjoy scheduling,

scene setting, app, voice, and out of

home control of your lights!

Add your devices to the C by GE

app.

Simple DIY Setup

Summary of content (5 pages)

PAGE 1
Direct Connect Quick Start Guide Simple DIY Setup 1 Screw or plug in your smart lights and power them on. 2 Download the C by GE app. 3 Add your devices to the C by GE app.
PAGE 2
How to Enable Out of Home Control and Voice Control with Amazon Alexa and Google Home or Nest Hub device 1 Screw or Plug In and power on your smart lights. 3 Enable voice control by following the directions in your voice assistant's app. 2 Download the C by GE app.
PAGE 3
GE Connected A19 CLEDA199SD1, input 120Vac, frequency was 60Hz, high efficiency, safety & stability output. Use Bluetooth 4.2 and Wi-Fi 2.4G Hz chip technology to realize the far distance control. Through the APP to control the PWM signal to dim and even control the switch on & off of the bulb. Product features: 1. Controlled by Bluetooth 4.2 and Wi-Fi 2.4G to realize the far distance control. 2. CCT range is 2000K-7000K, default CCT is 2700K. 3.
PAGE 4
Antenna Type Metal Monopole and PCB Antenna Channel Number Wi-Fi 11 Channel Separation Wi-Fi 5MHz 802.11b:11, 5.5,2,1 Mbps Data Rate Wi-Fi 802.11g: 54,48,36,24,18,12,9,6 Mbps 802.11n: up to 65Mbps Peak Antenna Gain 0.9dBi Bluetooth Peak Antenna Gain Wi-Fi -1.6dBi For additional help, regulatory and safety Information, please go to: Federal Communications Commission (FCC) Interference Statement This device complies with Part 15 of the FCC Rules.
PAGE 5
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body.