Instructions / Assembly

Surge Protector
Instructions
1. Move surge power switch to “OFF.” Plug surge
into a standard grounding wall receptacle.
2. Make sure electronic equipment is turned off and
plug into the surge unit outlets.
3. Move surge power switch to “ON.” Unit should
be providing surge protection. Check indicator
light(s) periodically (see note.) A glowing red
indicator light shows that surge protection is
being provided.
This device features an internal protection that
will disconnect the surge protective component at
the end of its useful life, but will maintain power
to the load – now unprotected. If this situation
is undesirable for the application, follow the
manufacturer’s instructions to replace the device.
NOTE: If any indicator light goes out, this unit
will no longer provide surge protection as
intended and should be replaced. This device
is not a lightning arrestor, so it will not afford
protection when lightning strikes nearby
power lines, the house, service entrance
or antenna.
Limited Lifetime Surge Protector
Warranty
Jasco Products Company warrants this surge
protector to be free of defects in workmanship
and/or materials for the life* of the surge protector.
If such a defect should arise during the life of the
surge protector, Jasco Products Company will,
at its option, either repair or replace the surge
protector without charge. This warranty does
not cover damage caused by lightning, accident,
misuse, or alterations to the surge protector.
*This surge protector, like all surge protectors, has
a fi nite lifespan. Even under normal circumstances
and in the absence of defects, the product’s life
will expire when the surge protector’s component
capacity has been exceed thereby ceasing to
provide protection from surges.
Warranty Replacement Procedure
1. Call Jasco Products Company Customer
Information Center at 1-800-654-8483 to get a
Return Authorization Number (RA#), shipping
instructions and a prepaid return address label.
2. Return the Jasco Products Company surge
protector, freight prepaid, to Jasco Products
Company, Customer Information Center. Surge
protectors returned to Jasco Products Company
must have an RA# included in the mailing
address to be accepted.
3. The original purchaser will be asked to send the
surge protector, a copy of your sales receipt for
the product, your name, address and phone
number and a handwritten description of the
problem.
is a trademark of General Electric Company
and is used under license to
Jasco Products Company LLC,
10 E. Memorial, Oklahoma City, OK 73114
WARNING
Risk of electric shock
• Do not use in wet locations
• Keep children away
• Use indoors only
• Fully insert plug
Risk of fire
• Do not exceed electrical
ratings
83969 7/08