45406 Home Monitoring Wired Color Camera User Manual For indoor/outdoor use. Do not use in wet locations www.jascoproducts.
Thank you for purchasing the GE 45406 Wired Color Camera. Please review these instructions carefully before attempting to operate the unit. PRODUCT FEATURES • Color camera with internal microphone • Small size for inconspicuous use • Supplied with cable, power supply and mounting accessories. • Plug-and-play connections for a fast and simple installation • Watch exactly what you want with full pan and tilt manual adjustment capability.
PACKAGE CONTENTS Please check and identify all the parts before proceeding with the installation. 1. 45406 Wired Color Camera with desktop mount 2. AC/DC Adapter 3. Wall Mounting Kit (wall mount, 1 screw, 1 plastic anchor, 20 cord clips) 4. 60’ Camera connection cable (not rated for inwall use.) INSTALLING AND VIEWING THE CAMERA Before starting the installation, we recommend you temporarily connect the camera to your TV to help determine the best location for installing the camera.
TV Power Video In Audio In 2. Select the AV channel on your TV by pressing the button labeled “AV” (sometimes also labeled as “Input”, “Mode”, or “Function”) on your TV or its remote control. You should now be able to see and hear the output from the camera. CONNECTION METHOD 2 If you are using a VCR/DVR with RCA jacks, connect the camera as shown on next page: To view the 45406 Wired Color Camera picture: 1. Switch on the TV, the VCR or DVR and set the volume to midpoint.
TV Power Audio In Video In VCR Audio In Video In Audio Video Out Out as “Input”, “Mode”, or “Function”) on your TV or its remote control. This should be the channel you normally use for watching the VCR or DVR. You should now be able to see and hear the output from the camera. WHERE TO POSITION THE CAMERA The 45406 Wired Color Camera is suitable for indoor or outdoor use.
• Avoid viewing areas where half the area is in bright sunlight and the other half is dark, such as the shadow of a building. All types of cameras have difficulty in “seeing” with such a large light-level variation. • The camera will work in low light conditions, but it will function better if a light, (such as a 100W incandescent lamp) is present near the camera for good visibility at night. • The camera cable may be extended up to 300 ft. with additional cable (not supplied.
3. The bracket can also be attached to the camera in two different ways, choose the method which suits you best. Ceiling mount Wall mount Desktop mount 4. Run the 60’ cable from the TV/VCR/DVR location to the camera and reconnect to the camera cable. Use the cord clips provided to keep the cable in place. 5. If you disconnected the camera leads from the TV/VCR/DVR, reconnect the cable. 6. Switch on the power to the TV/VCR/DVR. 7.
NOTES ON CABLE INSTALLATION • Keep the camera cable away from other cables where possible, in order to reduce the risk of picture and audio interference. • Avoid laying the cable next to any heat sources. • If the cable is run along the ground, a protective covering must be used to prevent the cable from being damaged. • Do not run the cable inside walls. • Do not pierce, puncture, or cut cable when installing.
Camera type..............................................................................color 1/4” CMOS Horizontal resolution .....................................................................360 TV lines Lens ....................................................................................................................5.6mm Minimum illumination ...................................................................................3 lux Video signal output ..........................................
WARNING Risk of fire and shock • Only use the supplied cUL listed AC to DC adapter. • The supplied adapter is for indoor use only. • Do not run the camera cable inside walls; when securing the cable, do not cut or puncture • Do not use in wet locations FCC STATEMENT NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Made in China is a trademark of General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114 www.jascoproducts.
