Owner's Manual

8
9
This indicates the device number location and zone
have been erased.
*NOTE: Some early production Control Center products were
designed to allow replacement only. In this situation you
will only be able to replace the remote device with another.
Contact Tech Support at 800-654-8483 option 4 to determine
if your Control Center is an early production model.
WARNING!
Risk of personal injury
- Prolonged exposure to alarm siren may cause permanent
hearing loss
Battery Warnings!
- Remove batteries before storing the Alarm or Remote
Transmitter for extended periods
- Batteries may leak harmful liquids or ignitable materials or
explode causing injury and product damage
- Do not mix old and new or other battery types
- Replace all batteries at the same time
- Replace fully discharged batteries immediately
- Remove batteries if product is to be unused for extended
periods of time
Keychain Remote F.A.Q.’S
Q. I bought a Keychain Remote and the Control Center will not
recognize it. Why?
A. First, make sure that the battery is new and has been correctly
installed, paying attention to polarity symbols (“+”, “-”). Confirm that
the Keychain Remote has been correctly assigned to a device.
Q. If I assign the Keychain Remote to Zone 4, will it still arm and
disarm the alarm system?
A. Yes. When assigning the Keychain Remote (or other remote