Owner's Manual

4
5
Introduction
The Window/Door Sensor is designed to be used
indoors or out. When mounted properly it can monitor
doors, windows, gates, cabinets, etc. – any door or
window that opens. When the door or window is
opened, the Sensor will transmit a signal to the Control
Center. The settings on the Control Center determine if
an alarm, alert or chime sounds
Parts Check List
Identify all the parts before proceeding.
2 - Screws and 2 - Plastic anchors
2 - Double sided tape
2- Screw caps
Mounting plate
Window/Door Sensor
with magnetic contact