Specification Sheet
32563 PRODUCT SPECIFICATIONS
www.byjasco.com
2
Related GE Z-Wave Products Color Matching Kits
35260
Silver
34193
Portable Smart
Motion Sensor
26931
In-Wall Smart
Motion Switch
35931
Smart LED
Bulb
26933
In-Wall Smart
Motion Dimmer
35257
Paintable
35259
Dark Brown
Compliances, specications and availability are
subject to change without notice
Distributed by Jasco Products Company LLC
10 E. Memorial Rd., Oklahoma City, OK
©Jasco 2018
Device Conguration
Adding your device to a Z-Wave network
Once the hub is ready to add your smart door sensor, press
and release button on the smart door sensor to add it
in the network.
To remove and reset the device
Once the controller is ready to remove your device, press and
release the button on the smart door sensor to remove it from
the network.
To return to factory defaults
Press the button 10 times quickly. LED will blink approximately 8
times to signal a successful reset.
Certications & Compliances
Adjusts for door trim
Reversible for right and
left door openings
Program button
CR2 battery included
(reverse)
Up to 2 years battery life