Product Label

PANTONE
Black C
PANTONE
281 C
PANTONE
7455 C
PANTONE
877 C
WHITE
ASTM
C920
CLASS 25
SILICONE 1
®
CLEAR
WINDOW & DOOR PROJECTS
SILICONE
100% WATERPROOF
EXCELLENT
FLEXIBILITY
STRONG
ADHESION
FREEZE &
SUN-PROOF
Outdoor
& Indoor
See limitations on back:
WARNING!
UNCURED PRODUCT
CAUSES IRRITATION
.
Read back panel before using.
10.1 FL OZ
(299 mL)
100% SILICONE
Non
Paintable
ALL PURPOSE
7-YEAR Mold-Free Sealant
Same-Day Rain-Ready
Lifetime Guarantee
WINDOWS
SIDEWALKS
DOORS
SIDING
BASEMENTS
TUCK POINTING
ROOFS
ATTICS
TYPICAL PRODUCT INFORMATION
Application Temp: ................................32°F to 120°F
Service Temp:.................................... -60°F to 400°F
Coverage (3/16" bead):...............................51 Lin. Ft.
Full Cure:.................................................... 24 hours
Water Exposure:.......................................... 12 hours
Paint Over Time: ........................ N/A (Non-paintable)
Odor: ......................................................... Ammonia
Clean-Up: ...........................................Mineral Spirits
Shelf Life
(from manufacturing date): .......... 24 months
Weathering & UV Resistance
(30-Yr. Study):. Excellent
ASTM C679 Tack-Free:.............................30 minutes
ASTM C719 Joint Movement Capability: ....... +/- 25%
ASTM D412 Tensile Elongation:........................328%
ASTM D412 Tensile Strength: ....................... 213 psi
ASTM D2240 Shore A Hardness, Durometer: ........ 25
VOC
(excluding water & exempt compounds): .... <36 g/L
CARB Chem Curing
(n-a) VOC: ................... <3.0 wt%
GE is a registered trademark of General Electric Company
and is used under trademark license by Henkel.
Silicone 1 is a registered trademark of Henkel and its
affiliates in the US and elsewhere.
For questions or information: Call 1-877-607-7407 or
visit www.gesealants.com.
© 2021 Henkel Corporation. All rights reserved.
†Estimates of comparative U.S. sales based on analysis of
available 2020 industry reports and retail sales data.
Rev. 0321
Stock No. GESIL1WD CLR
Model No. GE012A
159509
Made in USA of foreign and domestic components.
Henkel Corporation
One Henkel Way
Rocky Hill, CT 06067
Meets ASTM C-920, Type-S, NS, Class 25, use NT,
G, A & O test requirements; Fed Spec TT-S-00230C;
TT-S-001543A.
GE All Purpose Silicone 1 is compliant for incidental
food contact under FDA 21 CFR177.2600 “Rubber
articles intended for repeated use.”
SPECIFICATION
WARNING: UNCURED PRODUCT MAY
CAUSE SKIN, EYE & RESPIRATORY TRACT
IRRITATION. May cause headache, dizziness,
nausea. Acetic acid released during cure.
Avoid breathing vapors. Use in well-ventilated
area. Wear gloves and eye protection and remove
contact lenses before using; thoroughly clean
hands after use. Eye contact: Flush eyes with water;
get medical attention if irritation persists. Contains
methyltriacetoxysilane, acetic acid and petroleum
distillates. Harmful if swallowed. Consult Safety
Data Sheet for further information. For
consumer and professional contractor use.
KEEP OUT OF REACH OF CHILDREN.
LIMITED LIFETIME GUARANTEE: Manufacturer warrants that this
product, when handled and used as directed, will meet the above
specifications for as long as you own your home. If not satisfied,
return proof of purchase for refund. This is the sole and exclusive
remedy and Manufacturer shall not be liable for any damages in
excess of the purchase price. THIS WARRANTY IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY
WARRANTY OF MERCHANTABILITY OR FITNESS.
Common building materials including
most metals and woods, aluminum,
composites, brick, stone, stucco,
masonry, cement board, glass, porcelain,
ceramic tile, drywall, plaster, vinyl siding,
PVC, fiberglass, and painted surfaces. Not
recommended for porous materials such
as cement. Test on inconspicuous area of
high-end metal finishes, as some
blemishing may occur during curing. Not
recommended for direct contact on the
reflective coatings on mirrors.
1. Remove dirt, grease, moisture, soap
residue & old caulk from area to be sealed.
Use backer rod for gaps larger than 3/8" x
3/8" (9.5 mm x 9.5 mm). 2. Remove cap &
cut nozzle to obtain desired bead size.
3. PIERCE INNER FOIL SEAL. 4. Using
caulk gun, apply sealant into gap. Sealant
beads should not be thicker than 1/2" (12.7
mm) or thinner than 1/8" (3.2 mm) using a
width-to-depth ratio of 2:1. Sealant should
be tooled within 5 to 10 minutes after
application. Do not use soapy water or oil
as a tooling aid. 5. Wipe hands & tools
thoroughly before washing. Clean tools
and uncured sealant residue immediately
with mineral spirits or paint thinner.
6. Allow at least 24 hours before exposing
sealant to water.
NOT RECOMMENDED FOR UNDERWATER
/ AQUARIUM USE.
FREEZE & SUN-PROOF: 100% weatherproof
sealant applies to wet or dry surfaces, is
permanently flexible and will not shrink or
crack when subjected to ultraviolet rays or
freezing temperatures.
7-YEAR MOLD-FREE SEALANT: Fully
cured sealant is resistant to stain-causing
mold and mildew growth. Regular
cleaning of sealant is required, however,
as soap and other residue may cause
secondary mold and mildew growth.
SAME-DAY RAIN-READY: Exposure to
water possible in as little as 12 hours with
bead size max 1/4", temperature min 65°F
and humidity min 50%. Do not touch or
clean sealant for 24 hours.
GE All Purpose, Silicone 1® sealant is 100% waterproof and ideal for a wide range of projects exposed
to harsh weather from the attic to the basement. Permanently flexible, it can stretch and move with the
house and will never break down due to ultraviolet rays or freezing temperatures. This high-quality
sealant is resistant to unsightly stain causing mildew growth. Backed by a lifetime guarantee.
ADHERES TO
INSTRUCTIONS
Maximum Graphics Height 185mm
Maximum Text & Graphics Width 146mm
Maximum Band Width 155mm