SDS

IDH number: 2764352
Product name: GE Supreme Silicone Kitchen & Bath Projects
Page 3 of 5
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper
exposure controls and protective equipment for each task performed.
Hazardous Component(s)
ACGIH TLV
OSHA PEL
AIHA WEEL
OTHER
Silane, dichlorodimethyl-, reaction
products with silica
None
0.8 mg/m3 TWA
20 MPPCF TWA
None
None
octamethylcyclotetrasiloxane
None
None
10 ppm TWA
None
1,1,1,3,3,3-Hexamethyldisilazane
None
None
50 ppm STEL
10 ppm TWA
None
Trimethoxy(methyl)silane
None
None
None
None
Engineering controls:
Use local ventilation if general ventilation is insufficient to maintain vapor
concentration below established exposure limits.
Respiratory protection:
Use NIOSH approved respirator if there is potential to exceed exposure
limit(s).
Eye/face protection:
Safety goggles or safety glasses with side shields. Full face protection should
be used if the potential for splashing or spraying of product exists. Safety
showers and eye wash stations should be available.
Skin protection:
Use chemical resistant, impermeable clothing including gloves and either an
apron or body suit to prevent skin contact.
9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state:
solid
Color:
Colorless
Odor:
amine-like
Odor threshold:
Not available.
pH:
Not available.
Vapor pressure:
Not available.
Boiling point/range:
Not available.
Melting point/ range:
Not available.
Vapor density:
Not available.
Flash point:
Not available.
Flammable/Explosive limits - lower:
Not available.
Flammable/Explosive limits - upper:
Not available.
Autoignition temperature:
Not available.
Flammability:
Not applicable
Evaporation rate:
Not available.
Solubility in water:
Not available.
Partition coefficient (n-octanol/water):
Not available.
VOC content:
2.8 %; 33 g/l (by weight, calculated using CARB method; g/L less water, less
exempts calculated using SCAQMD method)
Viscosity:
Not available.
Decomposition temperature:
Not available.
10. STABILITY AND REACTIVITY
Stability:
Stable under normal conditions of storage and use.
Hazardous reactions:
None under normal processing.
Hazardous decomposition
products:
Oxides of carbon. Oxides of silicon. Formaldehyde.
Incompatible materials:
Acids and bases. Oxidizing agents. Amines.
Reactivity:
Not available.
Conditions to avoid:
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.
Exposure to moisture.
11. TOXICOLOGICAL INFORMATION
Relevant routes of exposure:
Skin, Inhalation, Eyes, Ingestion