SDS

Version: 3.1
Revision Date: 06/11/2021
GE112A
SDS_US
7/16
Individual protection measures, such as personal protective equipment
General information:
Ventilation and other forms of engineering controls are preferred for
controlling exposures. Respiratory protection may be needed for non-
routine or emergency situations.
Eye/face protection:
Safety glasses with side shields Wear face shield if there is risk of
splashes.
Skin Protection
Hand Protection:
Cloth gloves.
Other:
Wear suitable protective clothing and eye/face protection.
Respiratory Protection:
If exposure limits are exceeded or respiratory irritation is experienced,
NIOSH/MSHA approved respiratory protection should be worn. Supplied
air respirators may be required for non-routine or emergency situations.
Respiratory protection must be provided in accordance with OSHA
regulations (see 29CFR 1910.134).
Hygiene measures:
Avoid contact with eyes, skin, and clothing. Ensure adequate ventilation,
especially in confined areas. Observe good industrial hygiene practices.
Wash hands before breaks and immediately after handling the product.
When using do not eat, drink or smoke.
9. Physical and chemical properties
Appearance
Physical state:
solid
Form:
Paste
Color:
White
Odor:
Acetic acid.
Odor threshold:
No data available.
pH:
Not applicable
Melting point/freezing point:
Not applicable
Initial boiling point and boiling range:
Not applicable
Flash Point:
> 93.3 °C (estimated)
Evaporation rate:
< 1
Flammability (solid, gas):
No data available.
Upper/lower limit on flammability or explosive limits
Flammability limit - upper (%):
No data available.
Flammability limit - lower (%):
No data available.
Explosive limit - upper:
No data available.
Explosive limit - lower:
No data available.
Heat of combustion:
No data available.