Owner's Manual

 CodeIdenticationFeature

The Code Identication Feature allows you to identify

the three digit library code stored under your device key.

For example, if you want to nd out what 4 digit code

is stored under your TV device key, follow the six steps

below:

1. Press and hold the SETUP button until the red

indicator stays on. Release the SETUP button.

2. Press and release the desired mode button (TV,

DVD, etc.). The red indicator blinks, then stays lit.

3. Press and release the SETUP button. The red

indicator blinks off.

4. To nd the rst digit for the code stored under the

mode key pressed in step 2, press each numeric key

from 0-9 in turn. When the red indicator blinks off

the number you pressed is the rst digit for the code

you are searching for.

5. To nd the second digit, repeat step 4, this time

when the red indicator blinks off this is the second

digit.

6. Repeat step 4 to nd the third and fourth digits.