Owner's Manual

Direct Code Entry

1. Press and hold the SETUP button until the red

indicator stays on, then release the SETUP button.

2. Press and release the desired mode button (TV,

DVD, etc.). The red indicator blinks, then stays lit.

3. Enter the 4 digit code from the code tables (on

separate sheet). Note: after a valid code entry, the

red indicator turns off. For an invalid code, the red

indicator ashes.

4. With your device on, press CHANNEL UP. If

the device responds, no further programming is

required. Note: If some buttons do not operate your

equipment, try one of the other codes for your brand.

Write your codes down here for easy reference later.

Device Device stored Code

TV TV

DVD

CBL/SAT

DVR/AUX