Owner's Manual

Troubleshooting

Remote does not operate your product.

• Press the mode button of the product you want to

control.

• Program the remote with a new code.

• Install new batteries. (You might have to reprogram

your remote after installing new batteries.)

• Remote may not be compatible with your product.

Remote does not operate some features of your

product.

• Program remote with a new code.

• Remote may not be able to operate all features of your

product or button names might be different than your

product.

Red Indicator blinks after you program a product

code.

• Remote did not accept the code.

• Try to program the code again or try a different code.

Lost Your Codes?

Enclosed with this remote is a sticker on which you

should write the codes for each device you programmed.

Apply the sticker to the back of the remote or

somewhere convenient for future reference.

Also on the sticker is our website address which, should

you lose your codes or programming instructions, you

can nd available on our website: